MFGL10GL3
Durapore® 0.22 µm, Millipak® Final Fill Capsule
Millipak® Final Fill 100
Select a Size
Inquire
This item is not able to be purchased as a guest user. For further information, please contact us at +420 225 296 100or
.About This Item
Skip To
Product Name
Durapore® 0.22 µm, Millipak® Final Fill Capsule, Millipak® Final Fill 100
material
polysulfone device
polysulfone support
agency
meets EP 2.6.14
meets JP 4.01
meets USP 85
sterility
irradiated
non-sterile
sterilization compatibility
gamma compatible
product line
Millipak® Final Fill 100
feature
hydrophilic
manufacturer/tradename
Millipak®
parameter
10 psi max. differential pressure (0.7 bar) at 25 °C (Reverse)
100 L process volume
3.81 L/min flow rate at 1.1 bar (ΔP)
5.5 bar max. inlet pressure (80 psi) at 25 °C
80 psi max. differential pressure (5.5 bar) at 25 °C (Forward)
technique(s)
sterile filtration: suitable
L
4.7 in.
W
3.0 in.
filter filtration area
500 cm2
impurities
<0.25 EU/mL USP bacterial endotoxins (LAL test, per device; aqueous extraction)
<0.25 EU/mL bacterial endotoxins (LAL test, per device; aqueous extraction)
matrix
Durapore®
pore size
0.22 μm pore size
bubble point
≥50 psi (3450 mbar), air with water
fitting
(38 mm (1 1/2 in.) Sanitary Flange Inlet and 13 mm (1/2 in.) Hose Barb Outlet)
Quality Level
Looking for similar products? Visit Product Comparison Guide
1 of 4
This Item | MFVL10ST3 | MFGL10SL3 | MFGL10SF3 |
|---|---|---|---|
| pore size 0.22 μm pore size | pore size 0.1 μm pore size | pore size 0.22 μm pore size | pore size 0.22 μm pore size |
| technique(s) sterile filtration: suitable | technique(s) sterile filtration: suitable | technique(s) sterile filtration: suitable | technique(s) sterile filtration: suitable |
| product line Millipak® Final Fill 100 | product line Millipak® Final Fill 100 | product line Millipak® Final Fill 100 | product line Millipak® Final Fill 100 |
| material polysulfone device, polysulfone support | material PVDF membrane, polysulfone housing, silicone O-ring | material polysulfone device, polysulfone support | material PVDF membrane, polysulfone housing, silicone O-ring |
| sterility irradiated, non-sterile | sterility sterile; irradiated | sterility irradiated, sterile; γ-irradiated | sterility sterile; irradiated |
| manufacturer/tradename Millipak® | manufacturer/tradename - | manufacturer/tradename Millipak® | manufacturer/tradename - |
Analysis Note
General description
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer general guidelines section of user guide shipped with this product
- Storage Statement: Please refer user guide shipped with this product
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations
Packaging
Preparation Note
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b)(6), validated based on large volume parenteral specifications as detailed in USP 788 Particulate Matter in Injections
Legal Information
Stay compliant with GMP using the Emprove® Program
Accelerate qualification, maintain compliance, and save time with Emprove® Dossiers.
Note: you will be brought to EmproveSuite.com. Your username and password are separate from SigmaAldrich.com and may differ.
Register for free and access Emprove® Dossiers within minutes. Upgrade your subscription plan to unlock advanced and customized content in the Emprove® Suite
Not finding what you are looking for? Visit the Emprove® Program Help page.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service