Saltar al contenido
Merck

Aflatoxins contamination in Pakistani brown rice: a comparison of TLC, HPLC, LC-MS/MS and ELISA techniques.

Toxicology mechanisms and methods (2014-07-26)
Javed Iqbal, Muhammad Asif Asghar, Aftab Ahmed, Mobeen Ahmed Khan, Khalid Jamil
RESUMEN

Advancement in the field of analytical food-chemistry has explored various experimental techniques for aflatoxins (AFs) quantification. The present study was aimed to compare four different techniques; thin-layer chromatography (TLC), high-performance liquid chromatography (HPLC), liquid chromatography-tandem mass spectrometry (LC-MS/MS) and enzyme-linked immunosorbent assay (ELISA) for the analysis of aflatoxin B₁ (AFB₁), B₂ (AFB₂), G₁ (AFG₁) and G₂ (AFG₂) in brown rice (n = 120) being collected from Karachi, Pakistan. All the four assays provide precised, accurate and comparable results. However, some differences were observed. For instance, TLC, HPLC and LC-MS/MS methodologies offered the advantage of the quantification of individual toxins in contrast to ELISA technique. The contamination ranges of AFB₁/AFB₂ as determined by TLC, HPLC and LC-MS/MS were 1.18-9.97/0.59-1.52, 0.16-10.54/0.26-1.35 and 0.11-10.88/0.38-1.48 µg/kg, respectively. However, AFG₁ and AFG₂ were not detected in any tested samples. Furthermore, owing to low-detection limit and sensitivity, HPLC and LC-MS/MS methodologies have identified greater number of contaminated samples in comparison to TLC and ELISA techniques. The overall average results of total AFs as provided by HPLC (3.79 µg/kg) and LC-MS/MS (3.89 µg/kg) were found higher in comparison to TLC (3.68 µg/kg) and ELISA (3.70 µg/kg). On the basis of achieved results, it was concluded that TLC, HPLC, LC-MS/MS and ELISA techniques are valuable tool for the quantification of AFs in cereals and grains. Furthermore, HPLC and LC-MS/MS techniques offer an added advantage for the detection of AFs in diminutive levels.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Acetona, ACS reagent, ≥99.5%
Sigma-Aldrich
Ácido sulfúrico, ACS reagent, 95.0-98.0%
Sigma-Aldrich
Ácido nítrico, ACS reagent, 70%
Sigma-Aldrich
Acetona, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Hidróxido de potasio, ACS reagent, ≥85%, pellets
Sigma-Aldrich
Cloruro de potasio, ACS reagent, 99.0-100.5%
Sigma-Aldrich
Hidróxido de sodio, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Cloroformo, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
Sigma-Aldrich
Sulfato de sodio, ACS reagent, ≥99.0%, anhydrous, granular
Sigma-Aldrich
Acetona, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%
Sigma-Aldrich
Hidróxido de sodio, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Sulfato de sodio, ACS reagent, ≥99.0%, anhydrous, powder
Sigma-Aldrich
Cloroformo, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains amylenes as stabilizer
Sigma-Aldrich
Hidróxido de sodio solution, 50% in H2O
Sigma-Aldrich
Cloroformo, contains ethanol as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Cloroformo, suitable for HPLC, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Bromuro de potasio, ≥99% trace metals basis
Sigma-Aldrich
Hidróxido de potasio, reagent grade, 90%, flakes
Sigma-Aldrich
Benceno, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Hidróxido de sodio solution, BioUltra, Molecular Biology, 10 M in H2O
Sigma-Aldrich
Benceno, ACS reagent, ≥99.0%
Sigma-Aldrich
Ácido nítrico, 70%, purified by redistillation, ≥99.999% trace metals basis
Sigma-Aldrich
Potassium hydroxide solution, 45 wt. % in H2O
Sigma-Aldrich
Cloruro de potasio, ReagentPlus®, ≥99.0%
Sigma-Aldrich
Hidróxido de sodio solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Ácido sulfúrico, 99.999%
Sigma-Aldrich
Hidróxido de potasio, semiconductor grade, pellets, 99.99% trace metals basis (Purity excludes sodium content.)
Sigma-Aldrich
Hidróxido de sodio, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Supelco
Benceno, analytical standard
Sigma-Aldrich
Cloruro de potasio, Molecular Biology, ≥99.0%