Accéder au contenu
Merck

Concentrations, gas-particle partitioning, and seasonal variations of polycyclic aromatic hydrocarbons at four sites in Turkey.

Archives of environmental contamination and toxicology (2014-12-07)
Askin Birgul, Yücel Tasdemir
RÉSUMÉ

Ambient air polycyclic aromatic hydrocarbon (PAH) samples were collected at traffic, residential, coastal, and semiurban sites in Bursa, Turkey, between June 2008 and June 2009. For the traffic, residential, coastal, and semiurban sites, the average gas phase total PAH (∑12PAH) concentrations were 113 ± 131, 142 ± 204, 53 ± 73, and 19 ± 34 ng/m(3), respectively, whereas the average particle phase total PAH concentrations were 28 ± 36, 56 ± 85, 24 ± 40, and 11 ± 23 ng/m(3), respectively. Phenanthrene and fluoranthene had the highest concentrations of all of the sampling sites in the gas phase. The PAH concentrations in the heating period were 5-7 times greater than the nonheating period concentrations. Principal component analysis (PCA) was used to investigate the relationship between the levels of PAHs determined in ambient samples and their possible sources. The PCA model shows that coal combustion and vehicle emissions affected PAH emissions. Moreover, the molecular diagnostic ratios indicated that coal-burning and traffic emissions were the dominant PAH sources. The multiple linear regression analysis indicated that the meteorological parameters also affected the ambient PAH concentrations. The sampling site characteristics, meteorological conditions, dispersion, and local sources all affected the concentration levels.

MATÉRIAUX
Numéro du produit
Marque
Description du produit

Sigma-Aldrich
Méthanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Acétone, ACS reagent, ≥99.5%
Sigma-Aldrich
Méthanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Dichlorométhane, suitable for HPLC, ≥99.8%, contains amylene as stabilizer
Sigma-Aldrich
Acétone, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Dichlorométhane, contains 40-150 ppm amylene as stabilizer, ACS reagent, ≥99.5%
Sigma-Aldrich
Acétone, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%
Sigma-Aldrich
Dichlorométhane, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 50-150 ppm amylene as stabilizer
Sigma-Aldrich
Méthanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Hexane, ReagentPlus®, ≥99%
Sigma-Aldrich
Dichlorométhane, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Hexane, suitable for HPLC, ≥95%
Sigma-Aldrich
Méthanol, anhydrous, 99.8%
Sigma-Aldrich
Hexane, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Sigma-Aldrich
Méthanol, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Méthanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
Dichlorométhane, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Méthanol, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Hexane, Laboratory Reagent, ≥95%
Sigma-Aldrich
Méthanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Acétone, ACS reagent, ≥99.5%
Sigma-Aldrich
Méthanol, Absolute - Acetone free
Supelco
Acétone, analytical standard
USP
Méthanol, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Méthanol, BioReagent, ≥99.93%
Supelco
Méthanol, analytical standard
Supelco
Hexane, analytical standard
Sigma-Aldrich
Fluorene, 98%
Supelco
Méthanol, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Dichlorométhane, Pharmaceutical Secondary Standard; Certified Reference Material