コンテンツへスキップ
Merck
  • Chronic sensitivity of white sturgeon (Acipenser transmontanus) and rainbow trout (Oncorhynchus mykiss) to cadmium, copper, lead, or zinc in laboratory water-only exposures.

Chronic sensitivity of white sturgeon (Acipenser transmontanus) and rainbow trout (Oncorhynchus mykiss) to cadmium, copper, lead, or zinc in laboratory water-only exposures.

Environmental toxicology and chemistry (2014-05-28)
Ning Wang, Christopher G Ingersoll, Rebecca A Dorman, William G Brumbaugh, Christopher A Mebane, James L Kunz, Doug K Hardesty
要旨

Chronic toxicity of cadmium, copper, lead, or zinc to white sturgeon (Acipenser transmontanus) and rainbow trout (Oncorhynchus mykiss) was evaluated in water-only exposures started with newly hatched larvae or approximately 1-mo-old juveniles. The 20% effect concentration (EC20) for cadmium from the sturgeon tests was higher than the EC20 from the trout tests, whereas the EC20 for copper, lead, or zinc for the sturgeon were lower than those EC20s for the trout. When the EC20s from the present study were included in compiled toxicity databases for all freshwater species, species mean chronic value for white sturgeon was in a relatively low percentile of the species sensitivity distribution for copper (9th percentile) and in the middle percentile for cadmium (55th percentile), zinc (40th percentile), or lead (50th percentile). However, the species mean chronic value for rainbow trout was in a high percentile for copper, lead, and zinc (∼68th-82nd percentile), but in a low percentile for cadmium (23rd percentile). The trout EC20s for each of the 4 metals and the sturgeon EC20s for cadmium or lead were above US Environmental Protection Agency chronic ambient water quality criteria (AWQC) or Washington State chronic water quality standards (WQS), whereas the sturgeon EC20s for copper or zinc were approximately equal to or below the chronic AWQC and WQS. In addition, acute 50% effect concentrations (EC50s) for copper obtained in the first 4 d of the chronic sturgeon test were below the final acute value used to derive acute AWQC and below acute WQS for copper.

材料
製品番号
ブランド
製品内容

Sigma-Aldrich
亜鉛, dust, <10 μm, ≥98%
Sigma-Aldrich
亜鉛, granular, 20-30 mesh, ACS reagent, ≥99.8%
Sigma-Aldrich
亜鉛, powder, <150 μm, 99.995% trace metals basis
Sigma-Aldrich
塩化カドミウム, 99.99% trace metals basis
Sigma-Aldrich
銅, powder, <425 μm, 99.5% trace metals basis
Sigma-Aldrich
銅, foil, thickness 0.25 mm, 99.98% trace metals basis
Sigma-Aldrich
銅, powder, 99.99% trace metals basis
Sigma-Aldrich
亜鉛, foil, thickness 0.25 mm, 99.9% trace metals basis
Sigma-Aldrich
亜鉛, nanopowder, 40-60 nm avg. part. size, ≥99% trace metals basis
Sigma-Aldrich
亜鉛, purum, powder
Sigma-Aldrich
銅, powder, <75 μm, 99%
Sigma-Aldrich
銅, wire, diam. 1.0 mm, ≥99.9%
Sigma-Aldrich
塩化カドミウム
Sigma-Aldrich
銅, nanopowder, 40-60 nm particle size (SAXS), ≥99.5% trace metals basis
Sigma-Aldrich
銅, powder (spheroidal), 10-25 μm, 98%
Sigma-Aldrich
銅, powder (dendritic), <45 μm, 99.7% trace metals basis
Sigma-Aldrich
亜鉛, granular, 30-100 mesh, 99%
Sigma-Aldrich
銅, foil, thickness 0.025 mm, 99.98% trace metals basis
Sigma-Aldrich
亜鉛, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.9%, granular
Sigma-Aldrich
銅, turnings, purum p.a., ≥99.0%
Sigma-Aldrich
銅, nanopowder, 60-80 nm particle size (APS), ≥99.5% trace metals basis
亜鉛, foil, 300x300mm, thickness 0.1mm, as rolled, 99.95+%
Sigma-Aldrich
銅, ACS reagent, granular, 10-40 mesh, ≥99.90%
Sigma-Aldrich
亜鉛, shot, <12 mm, 99.99% trace metals basis
Sigma-Aldrich
銅, foil, ≥99.8% (complexometric)
Sigma-Aldrich
銅, beads, 2-8 mm, 99.9995% trace metals basis
Sigma-Aldrich
銅, foil, thickness 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
亜鉛, mossy, ≥99%
銅, mesh, 100x100mm, nominal aperture 0.14mm, thickness 0.25mm, wire diameter 0.115mm, 100x100 wires/inch, open area 30.3%, plain weave mesh
Sigma-Aldrich
銅, foil, thickness 0.5 mm, 99.98% trace metals basis