CC1100
GM6001 MMP Inhibitor Powder
The GM6001 MMP Inhibitor Powder controls the biological activity of MMP. This small molecule/inhibitor is primarily used for Biochemicals applications.
Synonim(y):
GM6001 Inhibitor
Zaloguj się, aby wyświetlić ceny organizacyjne i kontraktowe.
Wybierz wielkość
Zmień widok
| Rozmiar/SKU | Dostępność | Cena netto |
|---|---|---|
10 mg | Sprawdź dostępność w koszyku | 2340,00 zł |
Informacje o tej pozycji
UNSPSC Code:
12352200
NACRES:
NA.77
eCl@ss:
32160405
2340,00 zł
Sprawdź dostępność w koszyku
Pomoc techniczna
Potrzebujesz pomocy? Nasz zespół doświadczonych naukowców chętnie Ci pomoże.
Pozwól nam pomócGeneral description
specificity:GM6001 MMP inhibitor, also known as Ilomastat or N-[(2R)-2-(hydroxamidocarbonylmethyl)-4-methylpentanoyl]-L-tryptophan methylamide, is a potent inhibitor of collagenases. Molecular weight: 388.47
Reported Ki values are as follows (see Galardy Ref):
Human MMP-1 (Fibroblast collagenase): 0.4 nM
Human MMP-3 (Stromelysin): 27 nM
Human MMP-2 (72 kDa gelatinase): 0.5 nM
Human MMP-8 (Neutrophil collagenase): 0.1 nM
Human MMP-9 (92 kDa gelatinase): 0.2 nM
Typical working dilution for use in cultured cells is 10-25 μM. {1mg/ml solution in DMSO equals 2.57 mM}. GM6001 will precipitate from aqueous solutions exceeding 100μM. Aqueous dilutions should be performed using low salt buffers to prevent precipitation of GM6001 from solution (Recommended dilution buffer: 50 mM Tris pH7.5, 150 mM NaCl, and 20 mM CaCl2.2H20). It is recommended that the concentration of GM6001 in aqueous working solutions is determined upon dilution and confirmed prior to each use. Additional Application information:
Use in vivo
Typical dosage for GM6001 in animals is 50-100mg/kg body weight. It is generally administered IP every day or every other day. It is thought to cross the blood brain barrier since studies have shown it effectiveness in MS models.
If delivered by I.V. the half life in an animal is approximate an hour so it will have to be administered quite often. Thus the preferred way is to deliver the drug by I.P as a suspension in water or saline. The half life does not change but because it is dissolving in the animal′s system slowly, administration is not done as frequently. It has to be redelivered every other day or so. It can also be delivered subcutaneously in a saline suspension. The drug will precipitate as stay as a mass within the tissue, but surprisingly enough does get into the animal system to be effective.
Solubility
Soluble up to at least 400 mg/mL in DMSO. It can then be diluted in water and must be mixed very quickly to avoid precipitation.
Stability
At a concentration of 1mM (0.1mM is preferred), GM6001 decomposes at the rate of 1% per month at 4°C. At 37°C this increases to 1% per day. At -20°C it is quite stable, and as a solid very highly stable
Low salt buffers are recommended as diluents to reduce precipitation. Diluted solutions should never be frozen.
Concentration of the stock solution should be periodically determined by absorbance at 280 nm.
Reported Ki values are as follows (see Galardy Ref):
Human MMP-1 (Fibroblast collagenase): 0.4 nM
Human MMP-3 (Stromelysin): 27 nM
Human MMP-2 (72 kDa gelatinase): 0.5 nM
Human MMP-8 (Neutrophil collagenase): 0.1 nM
Human MMP-9 (92 kDa gelatinase): 0.2 nM
Typical working dilution for use in cultured cells is 10-25 μM. {1mg/ml solution in DMSO equals 2.57 mM}. GM6001 will precipitate from aqueous solutions exceeding 100μM. Aqueous dilutions should be performed using low salt buffers to prevent precipitation of GM6001 from solution (Recommended dilution buffer: 50 mM Tris pH7.5, 150 mM NaCl, and 20 mM CaCl2.2H20). It is recommended that the concentration of GM6001 in aqueous working solutions is determined upon dilution and confirmed prior to each use. Additional Application information:
Use in vivo
Typical dosage for GM6001 in animals is 50-100mg/kg body weight. It is generally administered IP every day or every other day. It is thought to cross the blood brain barrier since studies have shown it effectiveness in MS models.
If delivered by I.V. the half life in an animal is approximate an hour so it will have to be administered quite often. Thus the preferred way is to deliver the drug by I.P as a suspension in water or saline. The half life does not change but because it is dissolving in the animal′s system slowly, administration is not done as frequently. It has to be redelivered every other day or so. It can also be delivered subcutaneously in a saline suspension. The drug will precipitate as stay as a mass within the tissue, but surprisingly enough does get into the animal system to be effective.
Solubility
Soluble up to at least 400 mg/mL in DMSO. It can then be diluted in water and must be mixed very quickly to avoid precipitation.
Stability
At a concentration of 1mM (0.1mM is preferred), GM6001 decomposes at the rate of 1% per month at 4°C. At 37°C this increases to 1% per day. At -20°C it is quite stable, and as a solid very highly stable
Low salt buffers are recommended as diluents to reduce precipitation. Diluted solutions should never be frozen.
Concentration of the stock solution should be periodically determined by absorbance at 280 nm.
Application
The GM6001 MMP Inhibitor Powder controls the biological activity of MMP. This small molecule/inhibitor is primarily used for Biochemicals applications.
Biochem/physiol Actions
Inhibitor Type: Protease Inhibitors
Protein Target: Interstitial collagenase
Physical form
Lyophilized, reconstitute in DMSO (1-5 mg/ml). Other organic solvents (ethanol) have also been used (Galardy et al., 1994).
some batches can be brown when hydrated; brown color does not influence inhibition ability; in solution GM6001 ranges from clear to brown
Preparation Note
Maintain lyophilized form at 2-8º C for up to one year from date of receipt. If reconstitution is in DMSO, material is soluble to at least 400 mg/mL and storage is recommended in usable aliquots at -20 º C. Avoid repeated freeze/thaw cycles. If reconstituting in aqueous solution, store short term in undiluted aliquots at 2-8º C. See stability information for further detail.
Legal Information
CHEMICON is a registered trademark of Merck KGaA, Darmstadt, Germany
Disclaimer
Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.
Ta strona może zawierać tekst przetłumaczony maszynowo.
1 of 1
Ta pozycja | |||
|---|---|---|---|
| description The GM6001 MMP Inhibitor Powder controls the biological activity of MMP. This small molecule/inhibitor is primarily used for Biochemicals applications. | description The GM6001 MMP Inhibitor controls the biological activity of MMP. This small molecule/inhibitor is primarily used for Biochemicals applications. | description The MMP Inhibitor III, also referenced under CAS 927827-98-3, controls the biological activity of MMP. This small molecule/inhibitor is primarily used for Protease Inhibitors applications. | description clone 41-1E5, Chemicon®, from mouse |
| assay ≥95% (HPLC) | assay - | assay ≥90% (TLC) | assay - |
| Quality Level 100 | Quality Level 100 | Quality Level 100 | Quality Level 100 |
| form powder | form liquid | form lyophilized solid | form - |
| shipped in wet ice | shipped in - | shipped in ambient | shipped in dry ice |
| storage temp. 2-8°C | storage temp. - | storage temp. −20°C | storage temp. - |
| manufacturer/tradename Chemicon® | manufacturer/tradename Chemicon® | manufacturer/tradename Calbiochem® | manufacturer/tradename Chemicon® |
Klasa składowania
11 - Combustible Solids
Co się dzieje?
WGK 3
Temperatura zapłonu (°F)
Not applicable
Temperatura zapłonu (°C)
Not applicable
Wybierz jedną z najnowszych wersji:
Masz już ten produkt?
Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.