Przejdź do zawartości
Merck

Ratio of 8-hydroxyguanine in intact DNA to free 8-hydroxyguanine is increased in Alzheimer disease ventricular cerebrospinal fluid.

Archives of neurology (2001-03-20)
M A Lovell, W R Markesbery
ABSTRAKT

Markers of oxidative stress are increased in cerebrospinal fluid (CSF) of patients with Alzheimer disease (AD), although none of those reported are appropriate diagnostic markers because of the overlap between patients with AD and control subjects. To determine the ratio of 8-hydroxyguanine (8-OHG) levels in intact DNA to free 8-OHG in the ventricular CSF of patients with AD and age-matched control subjects. The most prominent marker of DNA oxidation is 8-OHG. Free 8-hydroxy-2'-deoxyguanosine (8-OHdG) was isolated from ventricular CSF taken at autopsy from 18 subjects with AD and 7 control subjects using solid-phase extraction columns. Levels were measured as the hydrolysis product, 8-OHG, using gas chromatography/mass spectrometry with selective ion monitoring. Intact DNA was isolated from the same CSF and the levels of 8-OHG were determined in the intact structures. Stable-labeled 8-OHG was used for quantification. A statistically significant (P<.05) 108-fold increase in the ratio of 8-OHG in intact DNA to free 8-OHG was observed in patients with AD. Analysis of the data distribution indicated that the lowest AD ratio was 3.5 times higher than the highest control ratio; there was no overlap of the 2 populations. Although the data for each individual measurement demonstrates overlap between patients with AD and control subjects, the ratio of 8-OHG intact in DNA to free 8-OHG demonstrates a delineation between patients with AD and control 8-OHG subjects and may be useful as a marker of disease progression or the efficacy of therapeutic antioxidant intervention.

MATERIAŁY
Numer produktu
Marka
Opis produktu

Supelco
L-Asparagine, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Supelco
L-Isoleucine, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Supelco
L-Glutamic acid, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
L-Serine, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
L-Glutamic acid, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Sigma-Aldrich
Nickel, foil, thickness 0.125 mm, ≥99.9%
Sigma-Aldrich
Calcium, pieces, <1 cm, 99%
Sigma-Aldrich
L-Phenylalanine, 99%, FCC
Sigma-Aldrich
Tin, 99.8%, shot, 3 mm
Sigma-Aldrich
Copper, powder, <425 μm, 99.5% trace metals basis
Sigma-Aldrich
Zinc, mossy, ≥99%
Sigma-Aldrich
Titanium, evaporation slug, diam. × L 6.3 mm × 6.3 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Nickel, wire, diam. 0.25 mm, ≥99.9%
Sigma-Aldrich
Calcium, dendritic pieces, purified by distillation, 99.9% trace metals basis
Sigma-Aldrich
Aluminum, foil, thickness 1.0 mm, 99.999% trace metals basis
Supelco
L-Phenylalanine, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Silicon, wafer (single side polished), <111>, P-type, contains boron as dopant, diam. × thickness 3 in. × 0.5 mm
Sigma-Aldrich
Silicon, wafer (single side polished), <111>, N-type, contains no dopant, diam. × thickness 3 in. × 0.5 mm
Sigma-Aldrich
Silicon, wafer (single side polished), contains phosphorus as dopant, <111>, N-type, diam. × thickness 2 in. × 0.5 mm
Sigma-Aldrich
Silicon, wafer (single side polished), <100>, P-type, contains boron as dopant, diam. × thickness 2 in. × 0.5 mm
Sigma-Aldrich
Silicon, wafer (single side polished), <100>, N-type, contains phosphorus as dopant, diam. × thickness 3 in. × 0.5 mm
Sigma-Aldrich
Silicon, wafer (single side polished), <100>, P-type, contains boron as dopant, diam. × thickness 3 in. × 0.5 mm
Sigma-Aldrich
Silicon, wafer (single side polished), <100>, N-type, contains phosphorus as dopant, diam. × thickness 2 in. × 0.5 mm
Sigma-Aldrich
Silicon, wafer (single side polished), <100>, N-type, contains no dopant, diam. × thickness 3 in. × 0.5 mm
Sigma-Aldrich
Glycine 1 M solution
Sigma-Aldrich
Silicon, wafer (single side polished), <100>, N-type, contains no dopant, diam. × thickness 2 in. × 0.5 mm
Sigma-Aldrich
Silicon, nanopowder, <100 nm particle size (TEM), ≥98% trace metals basis
Fumaric acid, European Pharmacopoeia (EP) Reference Standard
Sigma-Aldrich
Titanium, sputtering target, diam. × thickness 2.00 in. × 0.25 in., 99.995% trace metals basis
Supelco
L-Isoleucine, Pharmaceutical Secondary Standard; Certified Reference Material