Saltar al contenido
MilliporeSigma
  • Proposal of a new degradation mechanism of enalapril maleate and improvement of enalapril maleate stability in tablet formulation with different stabilizers.

Proposal of a new degradation mechanism of enalapril maleate and improvement of enalapril maleate stability in tablet formulation with different stabilizers.

Die Pharmazie (2014-05-06)
J Chen, L H Zhang, R J Xu, N J Bu, L Zhang
RESUMEN

Enalapril maleate (EM) is unstable in poorly designed tablet formulations. To improve the stability of EM, the degradation mechanism should be elucidated. In this study, we found that several commonly used excipients promoted the degradants of EM, particularly a diketopiperazine derivative (DKP). We propose two degradation pathways in which both acid and alkali can promote the formation of DKP, although previous reports suggested that DKP is produced mainly in acidic media. Based on the degradation pathways, we believe that subtle control of the microenvironmental pH can inhibit the formation of DKP. This was confirmed by the observation that the degradation rate became slower when certain organic acids were added to the binary mixtures of EM and excipient. The data showed that the stability of EM in the ternary mixtures was much higher than that in binary mixtures. It was further proved that tablets containing these organic acids produced less DKP after the accelerated test. We also found that the formation of DKP in tablets varied with different ratios of tartaric acid, which was used as a model organic acid. This illustrated that an optimum ratio of tartaric acid is required. These results indicated that the stability of EM in tablet formulation is closely associated with microenvironmental pH and the addition of a suitable organic acid based on the reaction mechanism is an effective strategy for improving the stability of EM.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Acetonitrilo, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Acetonitrilo, HPLC Plus, ≥99.9%
Sigma-Aldrich
Acetonitrilo, ACS reagent, ≥99.5%
Sigma-Aldrich
Acetonitrilo, anhydrous, 99.8%
Sigma-Aldrich
Acetonitrilo, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Acetonitrilo, suitable for HPLC-GC, ≥99.8% (GC)
Sigma-Aldrich
Acetonitrilo, HPLC Plus, ≥99.9%, poly-coated bottles
Sigma-Aldrich
Acetonitrilo, biotech. grade, ≥99.93%
Sigma-Aldrich
Acetonitrilo, electronic grade, 99.999% trace metals basis
Sigma-Aldrich
Acetonitrilo solution, contains 0.1 % (v/v) formic acid, suitable for HPLC
Sigma-Aldrich
Acetonitrilo, suitable for DNA synthesis, ≥99.9% (GC)
Sigma-Aldrich
Acetonitrilo solution, contains 0.1 % (v/v) trifluoroacetic acid, suitable for HPLC
Supelco
Acetonitrilo, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Enalapril Maleate, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Acetonitrilo, analytical standard
Supelco
Acetonitrilo, HPLC grade, ≥99.93%
Sigma-Aldrich
Acetonitrilo, ReagentPlus®, 99%
Sigma-Aldrich
Enalapril maleate salt, powder, ≥98% (HPLC)
Sigma-Aldrich
Acetonitrilo, ≥99.8%, suitable for HPLC
Sigma-Aldrich
Acetonitrilo, ≥99.8%, suitable for residue analysis, JIS 300
Sigma-Aldrich
Acetonitrilo, ≥99.5%, ACS reagent
USP
Acetonitrilo solution, United States Pharmacopeia (USP) Reference Standard
Supelco
Acetonitrilo, Pharmaceutical Secondary Standard; Certified Reference Material
USP
Enalapril maleate, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Acetonitrilo solution, contains 10.0% acetone, 0.05% formic acid, 40.0% 2-propanol
Sigma-Aldrich
Acetonitrilo solution, contains 0.05 % (v/v) trifluoroacetic acid
Sigma-Aldrich
Acetonitrilo, JIS special grade, ≥99.5%
Sigma-Aldrich
Acetonitrilo solution, contains 0.05 % (w/v) ammonium formate, 5 % (v/v) water, 0.1 % (v/v) formic acid, suitable for HPLC
Sigma-Aldrich
Acetonitrilo
Enalapril maleate, European Pharmacopoeia (EP) Reference Standard