Saltar al contenido
MilliporeSigma

Occurrence of pharmaceutical compounds and pesticides in aquatic systems.

Marine pollution bulletin (2015-05-23)
Maria Gonzalez-Rey, Nathalie Tapie, Karyn Le Menach, Marie-Hélène Dévier, Hélène Budzinski, Maria João Bebianno
RESUMEN

This paper deals with the detection and quantification of APIs and other priority substances in the Arade River estuary (Portugal) providing the usefulness of Polar Organic Compound Integrative Samplers (POCIS). Thirteen APIs were detected whose variation was site and time dependent. Caffeine was at the highest concentration (804±209 ng/L) followed by theophylline (184±44 ng/L). Other APIs were analgesic, anticonvulsant, non-steroidal anti-inflammatory drugs, anti-lipidemic, anxiolytic and antidepressants. Twenty pesticides comprising atrazine, diuron, isoproturon, terbutryn and simazine included in the Water Framework Directive priority list were also site and time dependent. Carbendazim occurred at the highest concentration (45±18 ng/L at site 1) but atrazine, diuron, isoproturon and simazine levels were below the Environmental Quality Standards. Although the summer impact was unclear, the results highlighted POCIS suitability for profiling these contaminants. This is to our knowledge the first study concerning APIs and pesticides in this area.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Diclorometano, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Acetonitrilo, anhydrous, 99.8%
Sigma-Aldrich
Metanol, anhydrous, 99.8%
Sigma-Aldrich
Metanol, JIS special grade, ≥99.8%
Sigma-Aldrich
Acetonitrilo, HPLC Plus, ≥99.9%, poly-coated bottles
Sigma-Aldrich
Acetonitrilo, electronic grade, 99.999% trace metals basis
Sigma-Aldrich
Acetona, JIS special grade, ≥99.5%
Sigma-Aldrich
Acetonitrilo solution, contains 0.1 % (v/v) formic acid, suitable for HPLC
Sigma-Aldrich
Metanol, SAJ first grade, ≥99.5%
Sigma-Aldrich
Acetonitrilo solution, contains 0.1 % (v/v) trifluoroacetic acid, suitable for HPLC
Sigma-Aldrich
Acetona, SAJ first grade, ≥99.0%
Supelco
Acetonitrilo, HPLC grade, ≥99.93%
Sigma-Aldrich
Metanol, SAJ special grade
Sigma-Aldrich
Acetona, ≥99%, FCC, FG
Sigma-Aldrich
Diclorometano, suitable for HPLC, ≥99.9%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Acetona, natural, ≥97%
Sigma-Aldrich
Acetona, suitable for HPLC, ≥99.9%
Supelco
Diclorometano, ≥99.9%
Sigma-Aldrich
Metanol, suitable for HPLC
Sigma-Aldrich
Acetonitrilo, ≥99.8%, suitable for HPLC
Sigma-Aldrich
Metanol, HPLC Plus, ≥99.9%, poly-coated bottles
Sigma-Aldrich
Acetonitrilo, ≥99.8%, suitable for residue analysis, JIS 300
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, 99.93%
Supelco
Methanol solution, contains 0.10 % (v/v) formic acid, UHPLC, suitable for mass spectrometry (MS), ≥99.5%
Sigma-Aldrich
Diclorometano, JIS special grade, ≥99.0%
Sigma-Aldrich
Diclorometano, SAJ first grade, ≥99.0%
Supelco
Dichloromethane solution, contains 10 % (v/v) methanol
Sigma-Aldrich
Acetonitrilo, ≥99.5%, ACS reagent
Sigma-Aldrich
Metanol, suitable for NMR (reference standard)
Sigma-Aldrich
Acetonitrilo solution, contains 10.0% acetone, 0.05% formic acid, 40.0% 2-propanol