PCC100C01

Pellicon^® Kapsel mit Ultracel^® Membran

pore size 100 kDa, C Screen, 0.1 m²

• Synonym(e): Pellicon^® Capsule with Ultracel^® Membrane
• UNSPSC-Code: 41104903

Eigenschaften

• Materialien: EPDM rubber seal; PPO/PS blend (core); PPO/PS blend housing; TPE seal; composite regenerated cellulose (CRC) membrane; epoxy adhesive; polyester screen; polypropylene screen; polyurethane adhesive
• Qualitätsniveau: 400
• Sterilität: sterile; γ-irradiated
• Produktlinie: Pellicon^®
• Lagerbedingungen: room temperature (15-30°C)
• Parameter: 4-6 L/min-m² flow rate; 45 psi max. transmembrane pressure (3.1 bar) at 4-30 °C (Forward); 80 psi max. inlet pressure (5.5 bar) at 4 - 30 °C
• Methode(n): ultrafiltration: suitable
• Länge: 35.3 cm (13.9 in.)
• Durchmesser: 3.8 cm (1.5 in.)
• Filtrationsfläche: 0.1 m²
• Vesikelgröße: , Type C screen (coarse screen)
• Volumen: 27 mL , in feed channel; 60 mL , in permeate channel
• Verunreinigungen: ≤5 ppm Meets TOC (in retentate effluent, after a WFI flush of 20 L/m²)
• Matrix: Ultracel^®
• Porengröße: 100 kDa
• pH-Bereich: 2-13
• Fitting: inlet/outlet connection (Feed: 3/4" Sanitary Flange); inlet/outlet connection (Permeate: 3/4" Sanitary Flange); inlet/outlet connection (Retentate: 3/4" Sanitary Flange)

Beschreibung

Allgemeine Beschreibung

The Pellicon^® Capsule is the first of its kind -- a true single-use TFF device that comes ready to process in minutes. Self-contained, it employs an easy-to-use, holderless format and is supplied sterilized by irradiation.

Anwendung

Viral Gene Therapies, Vaccines, Concentration, Diafiltration, Buffer exchange, Protein purification, mRNA

Leistungsmerkmale und Vorteile

Plug ′n play, holderless design - easy to install, safe to remove
Gamma sterilized and preservative-free - ready to process in minutes
True single-use, self-contained capsule - fast, safe, and flexible batch turnaround
Proven Ultracel^® membrane and C screen - high recovery, superior mass transfer, solvent resistance
Pellicon^® TFF proven performance - true linear scalability within Pellicon^® TFF families

Verpackung

A foam clamshell is inserted over the end caps on both ends of the capsule which is then double-bagged and vacuum sealed. The double-bagged capsule is placed on a tray and then individually boxed.

Sonstige Hinweise

The Emprove^® Program complements the product portfolio through

Comprehensive documentation to support qualification, risk assessment and process optimization needs.
Consolidation of product specific testing, quality and regulatory information to simplify compliance requirements.
Convenient 24/7 access to up-to-date product information.

Rechtliche Hinweise

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany