Direkt zum Inhalt
Merck

Improving the hydrogen oxidation reaction rate by promotion of hydroxyl adsorption.

Nature chemistry (2013-03-21)
Dusan Strmcnik, Masanobu Uchimura, Chao Wang, Ram Subbaraman, Nemanja Danilovic, Dennis van der Vliet, Arvydas P Paulikas, Vojislav R Stamenkovic, Nenad M Markovic
ZUSAMMENFASSUNG

The development of hydrogen-based energy sources as viable alternatives to fossil-fuel technologies has revolutionized clean energy production using fuel cells. However, to date, the slow rate of the hydrogen oxidation reaction (HOR) in alkaline environments has hindered advances in alkaline fuel cell systems. Here, we address this by studying the trends in the activity of the HOR in alkaline environments. We demonstrate that it can be enhanced more than fivefold compared to state-of-the-art platinum catalysts. The maximum activity is found for materials (Ir and Pt₀.₁Ru₀.₉) with an optimal balance between the active sites that are required for the adsorption/dissociation of H₂ and for the adsorption of hydroxyl species (OHad). We propose that the more oxophilic sites on Ir (defects) and PtRu material (Ru atoms) electrodes facilitate the adsorption of OHad species. Those then react with the hydrogen intermediates (Had) that are adsorbed on more noble surface sites.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Platinschwarz, black, powder, ≤20 μm, ≥99.95% trace metals basis
Sigma-Aldrich
Platin, wire, diam. 1.0 mm, 99.9% trace metals basis
Sigma-Aldrich
Platin, foil, thickness 0.025 mm, 99.9% trace metals basis
Sigma-Aldrich
Platin, wire, diam. 0.5 mm, 99.9% trace metals basis
Sigma-Aldrich
Iridium, powder, 99.9% trace metals basis
Sigma-Aldrich
Platin, wire, diam. 0.5 mm, 99.99% trace metals basis
Sigma-Aldrich
Platin, gauze, 52 mesh, 99.9% trace metals basis
Sigma-Aldrich
Platin, powder, 99.995% trace metals basis
Sigma-Aldrich
Ruthenium, powder, 99.99% trace metals basis
Sigma-Aldrich
Platin, wire, diam. 0.25 mm, 99.9% trace metals basis
Sigma-Aldrich
Platin, gauze, 100 mesh, 99.9% trace metals basis
Sigma-Aldrich
Platinschwarz, ≥99.9% trace metals basis
Sigma-Aldrich
Platin, foil, thickness 0.05 mm, 99.99% trace metals basis
Sigma-Aldrich
Ruthenium, powder, −200 mesh, 99.9% trace metals basis
Sigma-Aldrich
Platin, nanopowder, <50 nm particle size (TEM)
Sigma-Aldrich
Platin, wire, diam. 2.0 mm, 99.9% trace metals basis
Sigma-Aldrich
Rutheniumschwarz
Sigma-Aldrich
Platin, wire, diam. 0.076 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Iridium, foil, thickness 0.25 mm, 99.9% trace metals basis
Sigma-Aldrich
Platin, wire, diam. 0.10 mm, 99.99% trace metals basis
Sigma-Aldrich
Platinschwarz, low bulk density, ≥99.9% trace metals basis
Sigma-Aldrich
Platin, wire, diam. 0.25 mm, 99.99% trace metals basis
Sigma-Aldrich
Platin, wire, diam. 0.127 mm, 99.99% trace metals basis
Sigma-Aldrich
Iridium, evaporation slug, diam. × L 0.6 cm × 1.2 cm, 99.9% trace metals basis
Sigma-Aldrich
Platin, sponge, ≥99.9% trace metals basis
Sigma-Aldrich
Platin, wire, diam. 0.25 mm, thermocouple grade
Sigma-Aldrich
Platin, foil, thickness 0.25 mm, 99.99% trace metals basis
Sigma-Aldrich
Platin, foil, thickness 1.0 mm, 99.99% trace metals basis
Sigma-Aldrich
Platin, shot, ≤3 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Platin, powder (coarse), 99.99% trace metals basis