Direkt zum Inhalt
Merck
  • Refractory open-angle glaucoma after neodymium-yttrium-aluminum-garnet laser lysis of vitreous floaters.

Refractory open-angle glaucoma after neodymium-yttrium-aluminum-garnet laser lysis of vitreous floaters.

American journal of ophthalmology (2014-10-14)
Lisa A Cowan, Kay T Khine, Vikas Chopra, Doreen T Fazio, Brian A Francis
ZUSAMMENFASSUNG

To illustrate 3 cases of chronic open-angle glaucoma secondary to the neodymium-yttrium-aluminum-garnet (Nd:YAG) laser vitreolysis procedure for symptomatic vitreous floaters. Observational case series. Location of the study was the Doheny Eye Institute. Three eyes of 2 patients who developed chronic open-angle glaucoma after Nd:YAG vitreolysis for symptomatic floaters presenting with very high intraocular pressure (IOP >40 mm Hg) were selected. The time from the laser treatment to the onset of elevated pressure ranges from 1 week to 8 months. There was no associated inflammation, steroid use, or other identifiable cause of chronic IOP elevation. All eyes were treated initially with glaucoma medication, followed by selective laser trabeculoplasty (SLT) and eventually glaucoma surgery (Trabectome) in 2 eyes for disease management. In all eyes, intraocular pressures were eventually stabilized within a normal pressure range from 18 to 38 months following Nd:YAG vitreolysis. At the latest follow-up post surgery, all eyes had intraocular pressures of 22 mm Hg or less with or without medications. Secondary open-angle glaucoma is a complication of Nd:YAG vitreolysis for symptomatic floaters that may present with an increase in intraocular pressure immediately, or many months after the surgery. Furthermore this complication may be permanent and require chronic medical therapy or glaucoma surgery.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Aluminium, ReagentPlus®, beads, 5-15 mm, 99.9% trace metals basis
Sigma-Aldrich
Aluminium, granular, <1 mm, 99.7% trace metals basis
Sigma-Aldrich
Aluminium, wire, diam. 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminium, foil, thickness 0.25 mm, 99.999% trace metals basis
Sigma-Aldrich
Neodym, powder, −40 mesh, ≥99% trace rare earth metals basis
Sigma-Aldrich
Yttrium, chips, 99.9% trace rare earth metals basis
Sigma-Aldrich
Aluminium, pellets, 3-12 mm, 99.99% trace metals basis
Sigma-Aldrich
Aluminium, foil, thickness 0.45-0.55 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminium, foil, thickness 0.13 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Aluminium, ACS reagent, 99%, wire, wire diam. ~1.5 mm
Sigma-Aldrich
Aluminium, foil, thickness 8 μm, 99% trace metals basis
Sigma-Aldrich
Aluminium, wire, diam. 0.58 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Aluminium, pellets, 3-8 mesh, ≥99.999% trace metals basis
Sigma-Aldrich
Aluminium, evaporation slug, diam. × L 6.3 mm × 6.3 mm, 99.999% trace metals basis
Aluminium, tube, 200mm, outside diameter 3.0mm, inside diameter 1.62mm, wall thickness 0.69mm, hard, 99.5%
Sigma-Aldrich
Aluminium, foil, thickness 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Yttrium-Sputtering-Target, diam. × thickness 2.00 in. × 0.25 in., 99.9% trace metals basis
Aluminium, rod, 1000mm, diameter 12.7mm, 99%
Aluminium, sphere, 100pcs, diameter 2.5mm, aluminum alloy 2017 precision sphere, grade 200, 95.2%
Aluminium, mesh, 150x150mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh
Aluminium, honeycomb, 600x600mm, thickness 20mm, cell size 3.2mm, cell wall 0.025mm, core density 0.072g/cm3, phenolic adhesive (resin), 99.5%
Aluminium, mesh, 300x300mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh
Aluminium, wire reel, 1m, diameter 0.02mm, hard, 99.99%
Neodym, rod, 50mm, diameter 12.5mm, cast, 99%
Aluminium, IRMM®, certified reference material, 1.0 mm foil
Aluminium, sphere, 100pcs, diameter 1.0mm, aluminum alloy 2017 precision sphere, grade 200, 95.2%
Aluminium, mesh, 900x900mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh
Aluminium, foam, 150x150mm, thickness 30mm, bulk density 0.2g/cm3, porosity 0.93, aluminum 6101 grade, 98.5%
Aluminium, tube, 100mm, outside diameter 0.86mm, inside diameter 0.76mm, wall thickness 0.05mm, as drawn, 99.5%
Aluminium, IRMM®, certified reference material, 0.1 mm foil