Direkt zum Inhalt
Merck
  • Immobilization of B, F, Cr, and As in alkaline coal fly ash through an aging process with water.

Immobilization of B, F, Cr, and As in alkaline coal fly ash through an aging process with water.

Environmental monitoring and assessment (2014-07-10)
Yasumasa Ogawa, Kento Sakakibara, Li Wang, Koichi Suto, Chihiro Inoue
ZUSAMMENFASSUNG

Fourteen different alkaline coal fly ashes (CFAs) were used for the experiment, in which each sample was mixed with water to be 28.6% of water content (wt/wt) and aged for 1-4 weeks at 10-30 °C. This simple treatment is advantageous for decreases in water-soluble B, F, Cr, and As. Compared to non-aged CFAs, their water-soluble fractions remained 0.56-88%, 21-85%, 0.37-93% and 2.6-88%, respectively, after aging for a week at 20 °C, although the amounts of Cr and As released from some CFA samples increased. Considering the significant decrease in elution of sulfate, Ca and Al after aging, the immobilization, namely prevention of toxic element elution, could be related to formation of secondary minerals such as portlandite, gypsum and ettringite. Immobilization of B and Cr tends to proceed preferentially under colder conditions. Aging at higher temperatures enhances the leachability of Cr in some CFA samples. Contrary to the behavior of B and Cr, water-soluble F effectively decreases under warmer conditions.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Bor, ≥95% (boron), amorphous powder
Sigma-Aldrich
Chrom, powder, ≥99% trace metals basis, <45 μm
Sigma-Aldrich
Arsen, 99.999% trace metals basis
Sigma-Aldrich
Arsen, powder, ≥99.997% trace metals basis
Sigma-Aldrich
Chrom, powder, 99.5%, −100 mesh
Sigma-Aldrich
Chrom, chips, 99.995% trace metals basis
Sigma-Aldrich
Bor, crystalline, 1 cm, 99.7% trace metals basis
Sigma-Aldrich
Chrom, chips, thickness ~2 mm, 99.5%
Chrom, rod, 25mm, diameter 2.0mm, 99.7+%
Chrom, rod, 50mm, diameter 2.0mm, 99.7+%
Chrom, foil, light tested, 25x25mm, thickness 0.025mm, permanent polyester support, 99.99+%
Chrom, rod, 10mm, diameter 2.0mm, 99.7+%
Chrom, bar, 100mm x 2mm x 2mm, 99.7+%
Bor, monofilament, 10m, diameter 0.2mm
Bor, monofilament, 5m, diameter 0.2mm
Chrom, foil, 100x100mm, thickness 3.0mm, hard, 99.95%
Bor, monofilament, 10m, diameter 0.1mm
Bor, monofilament, 200m, diameter 0.1mm
Chrom, foil, not light tested, 25x25mm, thickness 0.015mm, permanent polyester support, 99.99+%
Chrom, microfoil, disks, 10mm, thinness 0.025μm, specific density 18.21μg/cm2, permanent mylar 3.5μm support, 99.99+%
Chrom, rod, 25mm, diameter 5.0mm, 99.7+%
Bor, monofilament, 20m, diameter 0.2mm
Chrom, microfoil, disks, 25mm, thinness 0.25μm, specific density 178.7μg/cm2, permanent mylar 3.5μm support, 99.99+%
Chrom, microfoil, disks, 25mm, thinness 1.0μm, specific density 719μg/cm2, permanent mylar 3.5μm support, 99.99+%
Chrom, rod, 10mm, diameter 5.0mm, 99.7+%
Chrom, rod, 100mm, diameter 2.0mm, 99.7+%
Chrom, rod, 50mm, diameter 5.0mm, 99.7+%
Chrom, foil, not light tested, 25x25mm, thickness 0.009mm, permanent polyester support, 99.99+%
Chrom, foil, not light tested, 25x25mm, thickness 0.0125mm, permanent polyester support, 99.99+%
Chrom, foil, not light tested, 25x25mm, thickness 0.03mm, permanent polyester support, 99.99+%