Passa al contenuto
Merck

Graphene oxide nanosheet wrapped white-emissive conjugated polymer nanoparticles.

ACS nano (2014-04-17)
Dong Youn Yoo, Nguyen Dien Kha Tu, Su Jin Lee, Eunji Lee, Seong-Ran Jeon, Sunyong Hwang, Ho Sun Lim, Jong Kyu Kim, Byeong Kwon Ju, Heesuk Kim, Jung Ah Lim
ABSTRACT

We have demonstrated the preparation of white-emissive conjugated polymer nanoparticles wrapped with graphene oxide (GO) nanosheets. Highly stable, GO-wrapped, poly(9,9-di-n-octylfluorenyl-2,7-diyl) nanoparticles (GO-PFO NPs) with diameters in the range 30-150 nm were successfully obtained by utilizing the GO nanosheets as an interface stabilizer in an emulsification process. The synthesized GO-PFO NPs exhibited unique white-emitting photoluminescence with a characteristic green-emissive broad band above 500 nm, which was distinct from the photoluminescent behavior of PFO NPs without GO. This green emission was deduced to originate from the presence of the GO nanosheet shell surrounding the PFO NPs, rather than from luminescence of GO itself or formation of keto defects in the PFO chain. PL decay analysis showed that the GO-wrapped PFO NPs had a longer luminescence lifetime in comparison to PFO NPs without GO, and highly efficient energy transfer to lower energy state induced by the GO occurred.

MATERIALI
Numero di prodotto
Marchio
Descrizione del prodotto

Sigma-Aldrich
Tetraidrofurano, inhibitor-free, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Acido solforico, ACS reagent, 95.0-98.0%
Sigma-Aldrich
Cloroformio, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
Sigma-Aldrich
Tetraidrofurano, contains 200-400 ppm BHT as inhibitor, ACS reagent, ≥99.0%
Sigma-Aldrich
Cloroformio, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains amylenes as stabilizer
Sigma-Aldrich
Cloroformio, contains ethanol as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Cloroformio, suitable for HPLC, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Tetraidrofurano, anhydrous, ≥99.9%, inhibitor-free
Sigma-Aldrich
Tetraidrofurano, anhydrous, contains 250 ppm BHT as inhibitor, ≥99.9%
Sigma-Aldrich
Acido solforico, 99.999%
Sigma-Aldrich
Acido solforico, puriss. p.a., for determination of Hg, ACS reagent, reag. ISO, reag. Ph. Eur., 95.0-97.0%
Sigma-Aldrich
Cloroformio, suitable for HPLC, ≥99.8%, amylene stabilized
Sigma-Aldrich
Cloroformio, contains amylenes as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Cloroformio, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Cloroformio, puriss. p.a., reag. ISO, reag. Ph. Eur., 99.0-99.4% (GC)
Sigma-Aldrich
Tetraidrofurano, ≥99.0%, contains 200-400 ppm BHT as inhibitor, ReagentPlus®
Sigma-Aldrich
Tetraidrofurano, contains 250 ppm BHT as inhibitor, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99.9%
Sigma-Aldrich
Cloroformio, ACS spectrophotometric grade, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Cloroformio, ReagentPlus®, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Cloroformio, anhydrous, ≥99%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Cloroformio, anhydrous, contains amylenes as stabilizer, ≥99%
Sigma-Aldrich
Hydrazine solution, 35 wt. % in H2O
Sigma-Aldrich
Cloroformio, contains ethanol as stabilizer, meets analytical specification of BP, 99-99.4% (GC)
Supelco
Acido solforico, 0.1 M H2SO4 in water (0.2N), eluent concentrate for IC
Sigma-Aldrich
Tetraidrofurano, ACS reagent, ≥99.0%, contains 200-400 ppm BHT as inhibitor
Sigma-Aldrich
Cloroformio, biotech. grade, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Acido solforico, puriss., meets analytical specification of Ph. Eur., BP, 95-97%
Sigma-Aldrich
Acido solforico, puriss. p.a., ≥25% (T)
Supelco
Acido solforico, for the determination of nitrogen, ≥97.0%
Sigma-Aldrich
Hydrazine solution, 1.0 M in THF