Passa al contenuto
Merck
  • Evaluation and enhancement of physical stability of semi-solid dispersions containing piroxicam into hard gelatin capsules.

Evaluation and enhancement of physical stability of semi-solid dispersions containing piroxicam into hard gelatin capsules.

Acta poloniae pharmaceutica (2013-10-24)
Ayşegül Karataş, Serife Bekmezci
ABSTRACT

The aim of the study was to investigate the physical stability of the semi-solid dispersions into the hard gelatine capsules prepared with Gelucire 44/14, Labrasol and different additives such as microcrystalline cellulose (MCC), mannitol and lactose (alpha-monohydrate) used for enhancing the stability of the formulations. The master dispersion prepared with only Gelucire 44/14 (20% w/w) and Labrasol (80% w/w) was stored in a refrigerator (5 +/- 3 degrees C), while the modified dispersions with the additives (2% w/w) were kept in a climatic chamber (25 +/- 2 degrees C / 60 +/- 5% RH) for 12 months. Dissolution tests of the semi-solid dispersions were performed in media with different pH's immediatly after preparation and after 3, 6 and 12 months of storage. FTIR and DSC studies were also carried out at the same time points. The ideal storage condition for the master dispersion was found to be at 5 degrees C. The addition of MCC, mannitol and lactose (alpha-monohydrate) to the original dispersion afforded a solidification effect on the formulation at room temperature and showed the same dissolution behavior (not less than 85% of piroxicam within 30 min in pH 1.2, 4.5 and 6.8; and water) with the master. The dispersion including lactose was stable at 25 degrees C for 12 months. However, the ideal period of storage for the modified dispersions including MCC and mannitol was 6 months at 25 degrees C. FTIR and DSC results both confirmed the amorphous state of piroxicam in all semi-solid dispersions under storage conditions for 12 months.

MATERIALI
Numero di prodotto
Marchio
Descrizione del prodotto

Sigma-Aldrich
Gelatin solution, Type B, 2% in H2O, tissue culture grade, BioReagent, suitable for cell culture
Sigma-Aldrich
Gelatina, powder, gel strength ~300 g Bloom, Type A, BioReagent, suitable for electrophoresis, suitable for cell culture
Sigma-Aldrich
Gelatina, gel strength 300, Type A
Sigma-Aldrich
Gelatina, solid
Sigma-Aldrich
D-mannitolo, ≥98% (GC)
Sigma-Aldrich
Gelatin from bovine skin, Type B, powder, BioReagent, suitable for cell culture
Supelco
D-mannitolo, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
D-mannitolo, ACS reagent
Sigma-Aldrich
D-mannitolo, ≥98% (GC), suitable for plant cell culture
Sigma-Aldrich
Gelatin from bovine skin, gel strength ~225 g Bloom, Type B
Sigma-Aldrich
Gelatina, gel strength ~175 g Bloom, Type A
USP
Mannitolo, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Gelatin from bovine skin, Type B
Sigma-Aldrich
Gelatina, gel strength 80-120 g Bloom, Type A
Sigma-Aldrich
Lactose, tested according to Ph. Eur.
Sigma-Aldrich
D-mannitolo, BioUltra, ≥99.0% (sum of enantiomers, HPLC)
Sigma-Aldrich
D-mannitolo, meets EP, FCC, USP testing specifications
Sigma-Aldrich
D-mannitolo, BioXtra, ≥98% (HPLC)
D-mannitolo, European Pharmacopoeia (EP) Reference Standard
Sigma-Aldrich
Gelatin, tested according to Ph. Eur.
Millipore
D-mannitolo, ACS reagent, suitable for microbiology, ≥99.0%
Sigma-Aldrich
Piroxicam, ≥98% (TLC)
Sigma-Aldrich
Prionex® Highly purified Type A, aqueous solution
Millipore
Gelatina, medium gel strength, suitable for microbiology
Sigma-Aldrich
Gelatina, Type A, lyophilized powder, γ-irradiated, BioXtra, suitable for cell culture
Millipore
Gelatina, suitable for microbiology, high gel strength
Sigma-Aldrich
D-mannitolo, tested according to Ph. Eur.
Millipore
Gelatina, suitable for microbiology, ultrahigh gel strength
Supelco
D-mannitolo, ≥99.9999% (metals basis), for boron determination
Piroxicam for system suitability, European Pharmacopoeia (EP) Reference Standard