Lugol's solution (product 1.09261) is specially formulated for use in Gram staining methods. There is no information on file regarding the use of this solution to stain cellulose fibers and analyzing by micro computed tomography. There is a review article from North Carolina State University that mentions various methods for staining cellulose fibers.
Wybierz wielkość
| Rozmiar/SKU | Dostępność | Cena netto |
|---|---|---|
1 L | Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności | 221,00 zł |
2.5 L | Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności | 463,00 zł |
Informacje o tej pozycji
221,00 zł
Quality Segment
form
liquid
IVD
for in vitro diagnostic use
technique(s)
microbe id | staining: suitable
pH
3.5 (20 °C in H2O)
bp
100 °C/1013 hPa
density
1.01 g/cm3 at 20 °C
application(s)
clinical testing
diagnostic assay manufacturing
hematology
histology
microbiology
storage temp.
15-25°C
General description
Lugol′s solution (diluted iodine-potassium iodide solution) is capable of staining up to 500 slides. This product is registered as IVD and CE marked. For more details, please see instructions for use (IFU). The IFU can be downloaded from this webpage.
Klasa składowania
6.1D - Non-combustible acute toxic Cat.3 / toxic hazardous materials or hazardous materials causing chronic effects
Temperatura zapłonu (°F)
Not applicable
Temperatura zapłonu (°C)
Not applicable
Słowo ostrzegawcze
Danger
Kody zagrożeń
Hazard Classifications
Repr. 1B
Wybierz jedną z najnowszych wersji:
Masz już ten produkt?
Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.
-
Hi, Can we use this Lugol solution for staining of cotton fibres to get absorption contrast in cotton/viscose blended (both cellulose) yarn during micro computed tomography?
1 answer-
Helpful?
-
-
Hi, is this a 1:1 mixture of KI and iodine solution in water? What's the concentration of each component, please?
1 answer-
Lugol's Solution is considered a weak or dilute iodine-potassium iodide soltuion. This product is intended for use in Gram staining. Although the exact concentration is considered proprietary, the Safety Data Sheet lists the Iodine concentration as greater than 0.1% but less than 1%. There is an expectation that the combined percentage of iodine and potassium iodide is approximately 1%. More concentrated solutions are not available at this time.
Helpful?
-
