Yes, the Millex SLGP05010 is bidirectional. The "inlet" stamp is intended to assist in following the directions in the User Guide for proper operation of the unit.
Wybierz wielkość
| Rozmiar/SKU | Dostępność | Cena netto |
|---|---|---|
10 pkg | Przewidywana wysyłka DZISIAJzKuehne + Nagel Sp. z o.o. | 723,00 zł |
Informacje o tej pozycji
723,00 zł
Przewidywana wysyłka DZISIAJSzczegóły
Quality Segment
material
methacrylate-butadiene-styrene (MBS) housing, polyethersulfone membrane
sterility
γ-irradiated, sterile
product line
Millex™
shelf life
3 yr
feature
holdup volume< 1 mL, hydrophilic
manufacturer/tradename
Millex™
parameter
≥350 mL/min water flow rate at 15 psig, 3.3 bar max. inlet pressure (50 psi), 45 °C max. temp.
technique(s)
pressure filtration: suitable, sterile filtration: suitable (sterilization of tissue culture media, protein solutions or aqueous solutions)
diam.
50 mm
filtration area
19.6 cm2 (3 in2)
housing diam.
62 mm
inlet to outlet H
72 mm
volume
8000 mL
impurities
≤20 EU/device bacterial endotoxins (LAL test, Aqueous extraction)
matrix
Express PLUS™
pore size
0.22 μm
input
aqueous solution(s)
tissue culture medium
bubble point
≥50 psi, water
fitting
inlet/outlet hose barb (1/4-1/2 in., with Female Luer slip interior)
shipped in
ambient
storage temp.
no temp limit
General description
Application
Preparation Note
- For use with peristaltic pump, a pump drive and pump head that delivers a constant speed of 60 revolutions per minute (rpm) is recommended. This generates an average flow rate of 100 mL/min.
- Recommended tubing: 4-9.5 mm I.D. silicone rubber or latex tubing
Other Notes
- For use with peristaltic pump, a pump drive and pump head that delivers a constant speed of 60 revolutions per minute (rpm) is recommended. This generates an average flow rate of 100 mL/min.
- Recommended tubing: 4-9.5 mm I.D. silicone rubber or latex tubing
Legal Information
1 of 1
Ta pozycja | |||
|---|---|---|---|
| description pore size 0.22 μm, diam. 50 mm, sterile, hydrophilic, 1/4-1/2 in. hose barb | description pore size 0.22 μm, diam. 50 mm, sterile, hydrophilic, 1/4-1/2 in. hose barb with outlet bell | description pore size 0.22 μm, diam. 33 mm, sterile, hydrophilic | description pore size 0.45 μm, diam. 33 mm, sterile, hydrophilic |
| pore size 0.22 μm | pore size 0.22 μm | pore size 0.22 μm | pore size 0.45 μm |
| manufacturer/tradename Millex™ | manufacturer/tradename Millex™ | manufacturer/tradename Millipore | manufacturer/tradename Millipore |
| diam. 50 mm | diam. 50 mm | diam. 33 mm | diam. 33 mm |
| material polyethersulfone membrane, methacrylate-butadiene-styrene (MBS) housing | material methacrylate-butadiene-styrene (MBS) housing, polyethersulfone membrane | material polyethersulfone membrane, modified acrylic housing | material modified acrylic housing, polyethersulfone membrane |
| fitting inlet/outlet hose barb (1/4-1/2 in., with Female Luer slip interior) | fitting inlet stepped hose barb (1/4-1/2 in, with Female Luer slip interior), outlet filling bell | fitting male Luer outlet for slip, female Luer-Lok® inlet | fitting female Luer-Lok® inlet fitting, male Luer outlet slip |
| sterility γ-irradiated, sterile | sterility γ-irradiated, sterile | sterility γ-irradiated, sterile | sterility sterile, γ-irradiated |
Still not finding the right product?
Explore all of our products under Millex™ polyethersulfone inline filter
— lub —
Wypróbuj nasze narzędzie Narzędzie selektora produktów, aby zawęzić opcje.
Klasa składowania
10-13 - German Storage Class 10 to 13
Wybierz jedną z najnowszych wersji:
Masz już ten produkt?
Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.
-
Is the Millex SLGP05010 bidirectional? If so, why does it say "Inlet" on one side?
1 answer-
Helpful?
-

