Przejdź do zawartości
Merck

Przejdź do

E6406

EZview Red Glutathione Affinity Gel

Zaloguj się, aby wyświetlić ceny organizacyjne i kontraktowe.

Wybierz wielkość

Zmień widok
Rozmiar/SKUDostępnośćCena netto
1 mL
Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności
1730,00 zł
5 x 1 mL
Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności
3110,00 zł

Informacje o tej pozycji

UNSPSC Code:
41106500
NACRES:
NA.56
MDL number:

1730,00 zł


Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności

Pomoc techniczna
Potrzebujesz pomocy? Nasz zespół doświadczonych naukowców chętnie Ci pomoże.
Pozwól nam pomóc


analyte chemical class(es)

proteins (GST)

Quality Segment

technique(s)

immunoprecipitation (IP): suitable, protein purification: suitable

storage temp.

2-8°C

General description

EZviewä Red Glutathione Affinity Gel is a highly visible, red colored glutathione agarose affinity gel. The affinity resin is composed of glutathione covalently attached through the sulfur to epoxy-activated 4% cross-linked agarose beads, resulting in a 12-atom spacer.

Application

The product is used for affinity capture, molecular pull-down, or IP of proteins containing glutathione binding sequences, such as glutathione S-transferase, glutathione peroxidase and glyoxalase I.
When performing small-scale affinity capture, such as immunoprecipitation, the affinity matrix is difficult to see in the microcentrifuge tubes. Accidental aspiration of the resin leads to quantitative variability in results. The EZview Red Affinity Gels greatly reduce the risk of pellet loss. EZview resins perform as well as conventional non-colored affinity gels, but allow the user to easily differentiate pellet from supernatant. This correlates to more accurate data because less protein is lost.

Features and Benefits

  • Increased visibility - Red color reduces risk of incidental aspiration
  • Improved recovery of target protein by reduced accidental loss
  • Higher reproducibility - More consistent yields

Physical form

1:1 (v/v) suspension in PBS containing 50% glycerol and MIT-HClis present at 30 PPM and 0.003% (w/v).

Legal Information

EZview is a trademark of Sigma-Aldrich Co. LLC
Ta strona może zawierać tekst przetłumaczony maszynowo.

Porównaj podobne pozycje

Wyświetl pełne porównanie

Pokaż różnice

1 of 1

Ta pozycja
P6486G0924E3403
description

-

description

-

description

(1:1 suspension in a 30% ethanol solution)

description

-

technique(s)

protein purification: suitable, immunoprecipitation (IP): suitable

technique(s)

immunoprecipitation (IP): suitable, affinity chromatography: suitable

technique(s)

immunoprecipitation (IP): suitable, protein purification: suitable

technique(s)

affinity chromatography: suitable, immunoprecipitation (IP): suitable

storage temp.

2-8°C

storage temp.

−20°C

storage temp.

2-8°C

storage temp.

−20°C

Quality Level

200

Quality Level

200

Quality Level

200

Quality Level

200

analyte chemical class(es)

proteins (GST)

analyte chemical class(es)

proteins (Immunoglobulins of various mammalian species)

analyte chemical class(es)

proteins (GST)

analyte chemical class(es)

proteins (Immunoglobulins of various mammalian species)


Klasa składowania

10 - Combustible liquids



Wybierz jedną z najnowszych wersji:

Certyfikaty analizy (CoA)

Lot/Batch Number

Nie widzisz odpowiedniej wersji?

Jeśli potrzebujesz konkretnej wersji, możesz wyszukać konkretny certyfikat według numeru partii lub serii.

Masz już ten produkt?

Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.

Odwiedź Bibliotekę dokumentów



Questions

  1. Why should E6406 be stored at -20°C, and what could happen if it is stored at a colder temperature?

    1 answer
    1. The recommendation to store this product at -20°C is due to the presence of 50% glycerol, which lowers its freezing point to approximately -23°C. Consequently, it should not freeze at -20°C; if it does, it may indicate that the freezer is set too low, not properly calibrated, or that the glycerol ratio is incorrect. If the material is frozen at or below -23°C, or if it contains less or no glycerol, the gel could be damaged, become fragile, and fail to perform as expected.

      Helpful?

Reviews

No rating value

Active Filters