It is advisable to mount purifier tubes vertically to prevent channeling caused by settling of fine adsorbent particles.
Przejdź do
23909
OMI® Purifier Tube
OMI-4 Purifier Tube
Synonim(y):
OMI®-4 INDICATOR TUBE
Zaloguj się, aby wyświetlić ceny organizacyjne i kontraktowe.
Wybierz wielkość
Zmień widok
| Rozmiar/SKU | Dostępność | Cena netto |
|---|
Informacje o tej pozycji
UNSPSC Code:
41115700
NACRES:
SB.54
Produkt 23909 nie jest obecnie dostępny w sprzedaży w Twoim kraju Skontaktuj się z zespołem ds. pomocy technicznej
Pomoc techniczna
Potrzebujesz pomocy? Nasz zespół doświadczonych naukowców chętnie Ci pomoże.
Pozwól nam pomóctechnique(s)
gas chromatography (GC): suitable using :Suitable
General description
The OMI is a polishing purifier that removes many contaminants that other upstream purifiers miss. It will simultaneously and irreversibly remove moisture, oxygen, carbon monoxide, carbon dioxide, most sulfur compounds, most halogen compounds, alcohols, and phenols to less than 10 ppb. It is recommended that an OMI be installed in carrier gas streams just upstream of every GC. It consists of two components:
Spent purifier tubes are easily replaced. Simply unscrew the end assembly from the tube holder and replace it with a new purifier tube. The design prevents room air from entering the new tube during installation (protective foil covers on each end are only pierced as the end assembly is screwed back onto the tube holder to complete installation).
Note: This item requires a re-useable tube holder (purchased separately).
- A re-useable tube holder that is installed into the gas delivery system. The use of polycarbonate provides see-through capability along with safety.
- A purifier tube containing an indicating resin (changes color from black to brown when exposed to as little as 1 ppm of moisture or oxygen). The use of glass provides see-through capability and prevents diffusion of room contaminants into the gas stream.
Spent purifier tubes are easily replaced. Simply unscrew the end assembly from the tube holder and replace it with a new purifier tube. The design prevents room air from entering the new tube during installation (protective foil covers on each end are only pierced as the end assembly is screwed back onto the tube holder to complete installation).
Note: This item requires a re-useable tube holder (purchased separately).
Other Notes
First time users must order both a purifier tube and a reuseable holder (P/N 23926).
Legal Information
OMI is a registered trademark of Merck KGaA, Darmstadt, Germany
Ta strona może zawierać tekst przetłumaczony maszynowo.
Still not finding the right product?
Explore all of our products under OMI® Purifier Tube
Słowo ostrzegawcze
Danger
Kody zagrożeń
Klasa składowania
4.3 - Hazardous materials which set free flammable gases upon contact with water
Co się dzieje?
WGK 3
Temperatura zapłonu (°F)
Not applicable
Temperatura zapłonu (°C)
Not applicable
Hazard Classifications
Eye Irrit. 2 - Skin Irrit. 2 - Water-react. 1
Wybierz jedną z najnowszych wersji:
Masz już ten produkt?
Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.
-
Does the purifier tube have to be installed vertically or horizontally?
1 answer-
Helpful?
-