Przejdź do zawartości
Merck

High mobility, low voltage operating C(60) based n-type organic field effect transistors.

Synthetic metals (2011-11-04)
G Schwabegger, Mujeeb Ullah, M Irimia-Vladu, M Baumgartner, Y Kanbur, R Ahmed, P Stadler, S Bauer, N S Sariciftci, H Sitter
ABSTRAKT

We report on C(60) based organic field effect transistors (OFETs) that are well optimized for low voltage operation. By replacing commonly used dielectric layers by thin parylene films or by utilizing different organic materials like divinyltetramethyldisiloxane-bis(benzocyclo-butene) (BCB), low density polyethylene (PE) or adenine in combination with aluminum oxide (AlOx) to form a bilayer gate dielectric, it was possible to significantly increase the capacitance per unit area (up to two orders of magnitude). The assembly of metal-oxide and organic passivation layer combines the properties of the high dielectric constant of the metal oxide and the good organic-organic interface between semiconductor and insulator provided by a thin capping layer on top of the AlOx film. This results in OFETs that operate with voltages lower than 500 mV, while exhibiting field effect mobilities exceeding 3 cm(2) V(-1) s(-1).

MATERIAŁY
Numer produktu
Marka
Opis produktu

Sigma-Aldrich
Polyethylene, Ultra-high molecular weight, average Mw 3,000,000-6,000,000
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Polyethylene, average Mw ~4,000 by GPC, average Mn ~1,700 by GPC
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Polyethylene, High density, melt index 2.2 g/10 min (190 °C/2.16kg)
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Polyethylene, Medium density
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Polyethylene, Ultra-high molecular weight, surface-modified, powder, 125 μm avg. part. size
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Polyethylene, Ultra-high molecular weight, surface-modified, powder, 34-50 μm particle size
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Polyethylene, low density, melt index 25 g/10 min (190°C/2.16kg)
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Polyethylene, High density, melt index 12 g/10 min (190 °C/2.16kg)
Informacje o cenach i dostępności nie są obecnie dostępne.
Supelco
Polyethylene, analytical standard, suitable for gel permeation chromatography (GPC), 2,000
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Polyethylene, Linear low density, melt index 1.0 g/10 min (190°C/2.16kg)
Informacje o cenach i dostępności nie są obecnie dostępne.