CW19M4S03

Milligard^®, 1,2 µm, Kartusche

pore size 1.2 μm, cartridge nominal length 4 in. (10 cm), Code M (2-118; O-rings)

• Synonym(e): Milligard Cartridge Filter 4 in. Code M 1.2 μm
• eCl@ss: 32031610
• UNSPSC Code: 23151806

Eigenschaften

• Produktname: Milligard^®, 1,2 µm, Kartusche, pore size 1.2 μm, cartridge nominal length 4 in. (10 cm), Code M (2-118; O-rings)
• material: mixed cellulose esters (MCE) ; polyester support; polypropylene ; silicone seal
• reg. compliance: meets EU framework regulation [1935/2004/EC] (all component materials; regarding materials and articles intended to contact food); meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• sterility: non-sterile
• sterilization compatibility: autoclavable compatible; steam-in-place compatible
• product line: Milligard^®
• feature: hydrophilic
• manufacturer/tradename: Milligard^®
• parameter: 3.5 bar max. differential pressure (50 psid) at 25 °C; 3.5 bar max. inlet pressure (50 psi) at 25 °C
• technique(s): prefiltration: suitable
• L: 4 in.
• W: 2.9 in.
• cartridge nominal length: 4 in. (10 cm)
• diam.: 7.1 cm (2.8 in.)
• filtration area: 0.34 m²
• impurities: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• gravimetric extractables: ≤20 mg/cartridge
• matrix: Milligard^®
• pore size: 1.2 μm nominal pore size; 1.2 μm pore size
• input: sample type liquid
• cartridge code: Code M (2-118; O-rings)
• Quality Level: 400

Beschreibung

Analysis Note

Erfüllt die Anforderungen des USP-Tests auf oxidierbare Substanzen nach Durchspülen mit ≥9 l Wasser

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Features and Benefits

Filter Grade: Standard Milligard^® Media

Format: Single Layer

General description

Device Configuration: Filterelement

Other Notes

Diese Produkte werden in einem Werk hergestellt, das den GMP-Richtlinien der FDA entspricht.

Directions for Use:

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to the installation and wetting sections of OptiScale^®-25 user guide and introduction section of the Mixed cellulose esters Tech Brief
• Storage Statement: Please refer to the Mixed cellulose esters Tech Brief
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Packaging

Leicht zu öffnender Doppelbeutel

Preparation Note

Sterilization Method
10 Autoklaven- oder In-situ-Dampfsterilisationszyklen von 30 min bei 121 °C

This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Legal Information

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

Sicherheitshinweise

• pictograms: GHS02
• signalword: Danger
• hcodes: H228
• pcodes: P210 - P240 - P241 - P280 - P370 + P378
• Hazard Classifications: Flam. Sol. 1
• Lagerklasse: 4.1B - Flammable solid hazardous materials
• wgk: WGK 2