Passa al contenuto
Merck
  • Synthesis and characterization of composite polymer, polyethylene glycol grafted flower-like cupric nano oxide for solid phase microextraction of ultra-trace levels of benzene, toluene, ethyl benzene and o-xylene in human hair and water samples.

Synthesis and characterization of composite polymer, polyethylene glycol grafted flower-like cupric nano oxide for solid phase microextraction of ultra-trace levels of benzene, toluene, ethyl benzene and o-xylene in human hair and water samples.

Journal of chromatography. A (2015-09-29)
Ali Sarafraz-Yazdi, Amene Zendegi-Shiraz, Zarrin Es'haghi, Mohammad Hassanzadeh-Khayyat
ABSTRACT

In this research, poly (ethylene glycol)-poly (ethylene glycol) grafted flower-like cupric oxidenano particles (PEG-PEG-g-CuO NPs) as a novel fiber coating of solid-phase microextraction (SPME) were synthesized by using sol-gel technology. This fiber was successfully applied to extract and determine the ultra-trace levels of benzene, toluene, ethyl benzene and o-xylene in human hair using head space-solid-phase microextraction (HS-SPME) coupled to gas chromatography-flame ionization detector. Characterization and chemical composition of the nano particle was performed by Fourier transform infrared spectroscopy (FT-IR), energy dispersion spectroscopy (EDS) and back scatter analysis (BSA). These methods confirmed the successful fabrication of PEG-g-CuO NPs. The surface morphology of the fibers were inspected by scanning electron microscopy. The scanning electron microscopy (SEM) revealed many "crack-like" features and highly porous structure on the surface of fiber. The synthesized nanocomposites were used for preconcentration and extraction of benzene, toluene, ethyl benzene and o-xylene (BTEX). The effects of operating parameters such as: desorption temperature and time, extraction temperature, extraction time, stirring speed and salt effect were investigated and optimized. Under the optimal conditions, the method detection limits and the limits of quantification were between 0.00025-50.00000pgmL(-1) and 0.00200-200.00000pgmL(-1), respectively. Linearity was observed over a range 0.00200-200000.00000pgmL(-1). The relative standard deviations for one fiber (repeatability; n=5) were obtained from 3.30 up to 5.01% and between fibers or batch to batch (n=3; reproducibility) in the range of 3.63-6.21%. The developed method was successfully applied to simultaneous determination of BTEX in human hairs, tap water and distillate water.

MATERIALI
Numero di prodotto
Marchio
Descrizione del prodotto

Sigma-Aldrich
Acetone, ACS reagent, ≥99.5%
Sigma-Aldrich
Acido trifluoroacetico, ReagentPlus®, 99%
Sigma-Aldrich
Metanolo, ACS reagent, ≥99.8%
Sigma-Aldrich
Diclorometano, contains 40-150 ppm amylene as stabilizer, ACS reagent, ≥99.5%
Sigma-Aldrich
Etilenglicole, ReagentPlus®, ≥99%
Sigma-Aldrich
Acetone, Laboratory Reagent, ≥99.5%
Sigma-Aldrich
Diclorometano, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Acido trifluoroacetico, puriss. p.a., suitable for HPLC, ≥99.0% (GC)
Sigma-Aldrich
Metanolo, anhydrous, 99.8%
Sigma-Aldrich
Sodio cloruro, Molecular Biology, DNase, RNase, and protease, none detected, ≥99% (titration)
Sigma-Aldrich
o-Xylene, puriss. p.a., ≥99.0% (GC)
Sigma-Aldrich
Sodio cloruro, 5 M in H2O, BioReagent, Molecular Biology, suitable for cell culture
Sigma-Aldrich
Sodio cloruro, BioXtra, ≥99.5% (AT)
Sigma-Aldrich
Sodio cloruro, BioReagent, suitable for cell culture, suitable for insect cell culture, suitable for plant cell culture, ≥99%
Sigma-Aldrich
Sodio cloruro, 0.9% in water, BioXtra, suitable for cell culture
Sigma-Aldrich
Etilenglicole, anhydrous, 99.8%
Sigma-Aldrich
Metanolo, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Acetone, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.5% (GC)
Sigma-Aldrich
Metanolo, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
Acido trifluoroacetico, ≥99%, for protein sequencing
Sigma-Aldrich
Diclorometano, puriss. p.a., ACS reagent, reag. ISO, ≥99.9% (GC)
Sigma-Aldrich
Etilenglicole, spectrophotometric grade, ≥99%
Sigma-Aldrich
Diclorometano, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Metanolo, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Metanolo, ACS reagent, ≥99.8%
SAFC
Sodio cloruro, 5 M
Supelco
Gruppo in fibra SPME divinilbenzene/carbossene/polidimetilsilossano (DVB/CAR/PDMS), 50/30µm DVB/CAR/PDMS, StableFlex (1 cm), needle size 23 ga, Autosampler, pk of 3, plain gray hub
Sigma-Aldrich
o-Xylene, reagent grade, ≥98.0%
Supelco
Gruppo in fibra SPME divinilbenzene/carbossene/polidimetilsilossano (DVB/CAR/PDMS), 50/30µm DVB/CAR/PDMS, StableFlex (2cm), needle size 24 ga, Autosampler, pk of 3, notched gray hub
Sigma-Aldrich
Acetone, ACS reagent, ≥99.5%