Passa al contenuto
Merck
  • The use of a hydrogel matrix for controlled delivery of niacin to the gastrointestinal tract for treatment of hyperlipidemia.

The use of a hydrogel matrix for controlled delivery of niacin to the gastrointestinal tract for treatment of hyperlipidemia.

Physiological research (2015-10-09)
J Sirc, J Hrib, M Vetrik, R Hobzova, A Zak, B Stankova, O Slanar, R Hromadka, V Sandrikova, J Michalek
ABSTRACT

Hyperlipidemia treatment based on niacin requires gastrointestinal administration of relatively high doses. The recommended dietary allowance of niacin as vitamin B3 is 14 to 16 mg daily in adults, while the doses of niacin used in the treatment of hyperlipidemia are generally in the range of 1 to 3 g. Administration of such large doses requires a high concentration of the active compound in the tablet and proper control of the drug release. In this study, a hydrogel matrix based on poly(2-hydroxyethyl methacrylate) and polyvinylpyrrolidone was investigated as delivery vehicle for controlled NA release into the gastrointestinal environment. The prepared hydrogel matrices varied in used monomer and crosslinker types and concentrations. The content of NA in tablets was between 65-80 %. The release profiles of NA from tablets were examined under three different pH values (1, 4.5 and 6.8) over the time period of 30 h. The effects of the monomer ratio, the crosslinking of the polymer network, and the solubility of niacin during drug release under various pH are discussed. The results showed that the release time period can be achieved in a relatively wide range of time and can be adjusted according to the medical requirements.

MATERIALI
Numero di prodotto
Marchio
Descrizione del prodotto

Sigma-Aldrich
Acido cloridrico, ACS reagent, 37%
Sigma-Aldrich
Acido cloridrico, ACS reagent, 37%
Sigma-Aldrich
Cloruro di idrogeno, 4.0 M in dioxane
Sigma-Aldrich
Acido cloridrico, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
1-vinil-2-pirrolidinone, contains sodium hydroxide as inhibitor, ≥99%
Sigma-Aldrich
2,2′-azobis(2-metilpropionitrile), 98%
Sigma-Aldrich
Acido cloridrico, 37 wt. % in H2O, 99.999% trace metals basis
Sigma-Aldrich
2-Hydroxyethyl methacrylate, ≥99%, contains ≤50 ppm monomethyl ether hydroquinone as inhibitor
Sigma-Aldrich
Cloruro di idrogeno, 2.0 M in diethyl ether
Sigma-Aldrich
Etilenglicole dimetilacrilato, 98%, contains 90-110 ppm monomethyl ether hydroquinone as inhibitor
Sigma-Aldrich
Acido cloridrico, 36.5-38.0%, BioReagent, Molecular Biology
Sigma-Aldrich
2-Hydroxyethyl methacrylate, contains ≤250 ppm monomethyl ether hydroquinone as inhibitor, 97%
Supelco
Acido cloridrico, volumetric, 0.1 M HCl (0.1N), endotoxin free
Sigma-Aldrich
Acido nicotinico, ≥99.5% (HPLC)
Sigma-Aldrich
Cloruro di idrogeno, 1.0 M in diethyl ether
Sigma-Aldrich
Acido cloridrico, ~6 M in H2O, for amino acid analysis
Sigma-Aldrich
Acido nicotinico, ≥98%
Sigma-Aldrich
Cloruro di idrogeno, 3 M in cyclopentyl methyl ether (CPME)
Supelco
Acido nicotinico, analytical standard
Sigma-Aldrich
Acido nicotinico, BioReagent, suitable for cell culture, suitable for insect cell culture, suitable for plant cell culture, ≥98%
Sigma-Aldrich
Acido cloridrico, 32 wt. % in H2O, FCC
Sigma-Aldrich
Cloruro di idrogeno, 1.0 M in acetic acid
Sigma-Aldrich
2-Hydroxyethyl methacrylate
Sigma-Aldrich
Acido nicotinico, meets USP testing specifications