Passa al contenuto
Merck

Synthesis of surfactant-free hydroxypropylcellulose nanogel and its dual-responsive properties.

Carbohydrate polymers (2015-10-03)
Dong An, Di Zhao, Xueting Li, Xihua Lu, Gao Qiu, Kenneth J Shea
ABSTRACT

Surfactant-free hydroxypropylcellulose (HPC) nanogels were synthesized by using thermo-sensitive HPC as a template to form HPC/PMAA nanoscale complex. The formation mechanism was owing to the interpolymer hydrogen bonding between HPC and PMAA induced phase transition of HPC in aqueous media. The average size of the resulting HPC nanogels ranges from about 98 to 241 nm. It was found that the average size of HPC nanogels changed little with increasing polymerization temperature below 26 °C, whereas it greatly increased above 26 °C. When the concentration of HPC was increased from 0.1 to 0.9 wt.%, the diameter of nanogels decreased firstly and then increased. Besides, an increasing crosslinker BIS concentration led to a reduced size of HPC nanogels, and the nanogels had the narrowest size distribution when its concentration was 0.1 wt.%. In addition to intrinsic thermo-sensitivity, HPC nanogels also display pH-induced phase transition due to pH-responsive PMAA contained in HPC nanogels. Surfactant-free, dual-responsive HPC nanogels would have promising applications in biotechnology and nanomedicine.

MATERIALI
Numero di prodotto
Marchio
Descrizione del prodotto

Sigma-Aldrich
Sodio idrossido, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Sodio idrossido, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Idrossido di sodio, 50% in H2O
Sigma-Aldrich
Ammonium persulfate, ACS reagent, ≥98.0%
Sigma-Aldrich
Idrossido di sodio, BioUltra, Molecular Biology, 10 M in H2O
Sigma-Aldrich
Idrossido di sodio, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
N,N,N′,N′-tetrametil-etilendiammina, BioReagent, suitable for electrophoresis, ≥99.0%
Sigma-Aldrich
Ammonium persulfate, Molecular Biology, suitable for electrophoresis, ≥98%
Sigma-Aldrich
Sodio idrossido, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Sodio idrossido, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Ammonium persulfate, reagent grade, 98%
Sigma-Aldrich
Sodio idrossido, reagent grade, 97%, powder
Sigma-Aldrich
N,N,N′,N′-tetrametil-etilendiammina, BioReagent, Molecular Biology, ≥99% (GC)
Sigma-Aldrich
Methacrylic acid, contains 250 ppm MEHQ as inhibitor, 99%
Sigma-Aldrich
Sodio idrossido, pellets, semiconductor grade, 99.99% trace metals basis
Sigma-Aldrich
N,N′-Methylenebisacrylamide, powder, Molecular Biology, suitable for electrophoresis, ≥99.5%
Sigma-Aldrich
N,N,N′,N′-tetrametil-etilendiammina, ≥99.5%, purified by redistillation
Sigma-Aldrich
N,N′-Methylenebis(acrylamide), 99%
Sigma-Aldrich
Idrossido di sodio, 5.0 M
Sigma-Aldrich
Sodio idrossido, beads, 16-60 mesh, reagent grade, 97%
Sigma-Aldrich
N,N,N′,N′-tetrametil-etilendiammina, ReagentPlus®, 99%
Sigma-Aldrich
Sodio idrossido, reagent grade, 97%, flakes
Sigma-Aldrich
Ammonium persulfate, BioUltra, ≥98.0% (RT)
Sigma-Aldrich
Sodio idrossido, BioUltra, suitable for luminescence, ≥98.0% (T), pellets
Sigma-Aldrich
N,N′-Methylenebisacrylamide solution, suitable for electrophoresis, 2% in H2O
Sigma-Aldrich
Sodio idrossido, ultra dry, powder or crystals, 99.99% trace metals basis
Sigma-Aldrich
Ammonium persulfate, BioXtra, ≥98.0%
Sigma-Aldrich
N,N′-Methylenebisacrylamide, suitable for electrophoresis (after filtration or allowing insolubles to settle)
Sigma-Aldrich
Adenosine 5′-phosphosulfate sodium salt, ≥85%
Sigma-Aldrich
Sodio idrossido, anhydrous, free-flowing, Redi-Dri, reagent grade, ≥98%, pellets