SLGP033N

Millex^™ polyethersulfone syringe filter

pore size 0.22 μm, diam. 33 mm, non-sterile, hydrophilic, PFAS Validated

• Synonim(y): 0.22 μm PES syringe filter, Millex-GP syringe filter, Millipore Express^® PES syringe filter, disposable syringe filter, polyethersulfone syringe filter, syringe filter
• UNSPSC Code: 41104922
• NACRES: NB.22
• eCl@ss: 32031690
• Pore size: 0.22 μm
• Diam.: 33 mm
• Sterility: non-sterile
• Material: polyethersulfone membrane, polypropylene housing

Właściwości

• Quality Segment: 400
• material: polyethersulfone membrane, polypropylene housing
• agency: PFAS Validated, suitable for EPA 1633, suitable for EPA 537.1
• sterility: non-sterile
• product line: Millex^™
• feature: holdup volume≤ 80 μL (after air purge), hydrophilic
• manufacturer/tradename: Millex^™
• parameter: 45 °C max. temp., 8.6 bar max. inlet pressure (125 psi)
• technique(s): UHPLC: suitable, analytical sample preparation: suitable, fast flow filtration: suitable, low protein-binding filtration: suitable
• H: 27 mm
• diam.: 33 mm
• filtration area: 4.5 cm²
• volume: 100 mL
• color: green
• matrix: Millipore Express^®
• pore size: 0.22 μm
• input: sample type aqueous solution(s); sample type mild organic solution(s)
• bubble point: ≥4.3 bar, air with water at 23 °C
• fitting: female Luer-Lok^® inlet, male Luer outlet slip
• application(s): PFAS testing
• shipped in: ambient

Opis

General description

Non-sterile Millex^™ syringe filters with 0.22 µm Millipore Express^® PLUS polyethersulfone (PES) membrane provide fast filtration of aqueous and mild organic solutions

• Validated for low levels of 42 PFAS compounds. These compounds are included in EPA 537.1 and EPA 1633. All compounds tested were below the reporting limit. Additional information is available in both the User Guide and Certificate of Quality
• Low protein binding to minimize interaction with your sample and maximize recovery
• Polypropylene housing, offering a low level of extractables and broad chemical compatibility
• Membrane type and pore size are printed on the device for easy reference
• A green band identifies non-sterile Millex^™ filters with Millipore Express^® PLUS PES membrane
• Recommended for filtering 10-100 milliliter (mL) volumes to remove particles prior to instrumentation analysis

Application

Suitable for sample filtration for PFAS testing, filtration of aqueous and mild organic solutions

Features and Benefits

For general laboratory use only

Legal Information

Luer-Lok is a registered trademark of Becton-Dickinson & Co.

MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany

Millex is a trademark of Merck KGaA, Darmstadt, Germany

Ta strona może zawierać tekst przetłumaczony maszynowo.