Przejdź do zawartości
Merck

Furan formation during storage and reheating of sterilised vegetable purées.

Food additives & contaminants. Part A, Chemistry, analysis, control, exposure & risk assessment (2014-12-20)
Stijn Palmers, Tara Grauwet, Carolien Buvé, Lore Van de Vondel, Biniam T Kebede, Marc E Hendrickx, Ann Van Loey
ABSTRAKT

To this day, research for furan mitigation has mostly targeted the levels of food production and handling of prepared foods by the consumer. However, part of the furan concentrations found in commercially available food products might originate from chemical deterioration reactions during storage. A range of individual vegetable purées was stored at two different temperatures to investigate the effects of storage on the furan concentrations of shelf-stable, vegetable-based foods. After 5 months of storage at 35°C (temperature-abuse conditions), a general increase in furan concentrations was observed. The furan formation during storage could be reduced by storing the vegetable purées at a refrigerated temperature of 4°C, at which the furan concentrations remained approximately constant for at least 5 months. Following storage, the vegetable purées were briefly reheated to 90°C to simulate the effect of the final preparation step before consumption. Contrary to storage, furan concentrations decreased as a result of evaporative losses. Both refrigerated storage and the reheating step prior to consumption showed the potential of mitigation measures for furan formation in vegetable-based foods (e.g. canned vegetables, ready-to-eat soups, sauces or baby foods). Next to furan, the vegetable purées were analysed for 2- and 3-methylfuran. Tomato was very susceptible to the formation of both alkylated derivatives of furan, as opposed to the other vegetables in this study. Methylfuran concentrations rapidly decreased during storage, which was contrary to the results observed for furan.

MATERIAŁY
Numer produktu
Marka
Opis produktu

Sigma-Aldrich
Furan, ≥99%
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Methanol, suitable for NMR (reference standard)
Informacje o cenach i dostępności nie są obecnie dostępne.
Supelco
Furan, analytical standard
Informacje o cenach i dostępności nie są obecnie dostępne.
Supelco
Methanol, analytical standard
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Methanol, ACS spectrophotometric grade, ≥99.9%
Informacje o cenach i dostępności nie są obecnie dostępne.
Supelco
Methanol, Pharmaceutical Secondary Standard; Certified Reference Material
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Methanol, BioReagent, ≥99.93%
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Methanol, suitable for HPLC, ≥99.9%
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Methanol, Absolute - Acetone free
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Methanol, Laboratory Reagent, ≥99.6%
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
Furan-d4, ≥98 atom % D, ≥99% (CP), contains 0.025 wt. % BHT as stabilizer
Informacje o cenach i dostępności nie są obecnie dostępne.
Sigma-Aldrich
3-Methylfuran, AldrichCPR
Informacje o cenach i dostępności nie są obecnie dostępne.
USP
Alkohol metylowy, United States Pharmacopeia (USP) Reference Standard
Informacje o cenach i dostępności nie są obecnie dostępne.