Passa al contenuto
Merck
  • Evaluation of silica/ferrocyanide composite as a dual-function material for simultaneous removal of ¹³⁷Cs⁺ and ⁹⁹TcO₄⁻ from aqueous solutions.

Evaluation of silica/ferrocyanide composite as a dual-function material for simultaneous removal of ¹³⁷Cs⁺ and ⁹⁹TcO₄⁻ from aqueous solutions.

Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine (2014-06-18)
Mamdoh R Mahmoud, Ayman F Seliman
ABSTRACT

A novel mesoporous silica-coated ferrocyanide (MSCFC) composite was successfully synthesized and evaluated as a dual-function material for simultaneous removal of (137)Cs(+) cations and (99)TcO4(-) anions from aqueous solutions. Sorption behavior of both radionuclides on MSCFC under different experimental conditions has been studied using a batch technique. Results revealed that about 100% of (137)Cs(+) and 97% of (99)TcO4(-) were removed by MSCFC in the pH ranges of 2.2-12.4 and 4.1-9.5, respectively. Sorption kinetic data were analyzed by pseudo-first-order, pseudo-second-order and intraparticle diffusion kinetic models, while Langmuir and Freundlich models were applied for the sorption isotherms. The maximum sorption capacity of MSCFC for radiocesium was determined and compared with other reported sorbents. Applicability of the coated ferrocyanide for simultaneous removal of (137)Cs(+) and (99)TcO4(-) from low-level liquid radioactive waste (LLLW) was also tested, and the data revealed that 99.91% and 98.34% were removed from (137)Cs(+) and (99)TcO4(-), respectively. It is concluded that MSCFC exhibits excellent efficiency for simultaneous removal of the mixed radionuclides with different charge from LLLW.

MATERIALI
Numero di prodotto
Marchio
Descrizione del prodotto

Sigma-Aldrich
Sodio idrossido, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Sodio idrossido, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Idrossido di sodio, 50% in H2O
Sigma-Aldrich
tetra-etil ortosilicato, reagent grade, 98%
Sigma-Aldrich
Cloruro di magnesio, Molecular Biology, 1.00 M±0.01 M
Sigma-Aldrich
Idrossido di sodio, BioUltra, Molecular Biology, 10 M in H2O
Sigma-Aldrich
Cloruro di magnesio, ≥98%
Sigma-Aldrich
Idrossido di sodio, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Sodio idrossido, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Sodio idrossido, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
tetra-etil ortosilicato, ≥99.0% (GC)
Sigma-Aldrich
Sodio idrossido, reagent grade, 97%, powder
Sigma-Aldrich
Sodio idrossido, puriss. p.a., ACS reagent, reag. Ph. Eur., K ≤0.02%, ≥98%, pellets
Sigma-Aldrich
Sodio idrossido, pellets, semiconductor grade, 99.99% trace metals basis
Sigma-Aldrich
Cloruro di magnesio, powder, <200 μm
Sigma-Aldrich
Idrossido di sodio, 5.0 M
Sigma-Aldrich
Sodio idrossido, beads, 16-60 mesh, reagent grade, 97%
Sigma-Aldrich
Sodio idrossido, puriss. p.a., ACS reagent, K ≤0.02%, ≥98.0% (T), pellets
Sigma-Aldrich
Sodio idrossido, reagent grade, 97%, flakes
Supelco
Idrossido di sodio, 49-51% in water, eluent for IC
Sigma-Aldrich
Cloruro di magnesio, BioUltra, Molecular Biology, 2 M in H2O
Sigma-Aldrich
tetra-etil ortosilicato, 99.999% trace metals basis
Sigma-Aldrich
Cloruro di magnesio, BioUltra, Molecular Biology, ~1 M in H2O
Supelco
Idrossido di sodio, 0.1 M NaOH in water (0.1N), Eluent concentrate for IC
Sigma-Aldrich
Cloruro di magnesio, suitable for insect cell culture, BioReagent, ≥97.0%
Sigma-Aldrich
Sodio idrossido, BioUltra, suitable for luminescence, ≥98.0% (T), pellets
Sigma-Aldrich
Cloruro di magnesio, PCR Reagent, 25 mM MgCI2 solution for PCR
Sigma-Aldrich
Idrossido di sodio, purum, ≥32%
Sigma-Aldrich
Cloruro di magnesio, AnhydroBeads, −10 mesh, 99.9% trace metals basis
Sigma-Aldrich
Cloruro di magnesio, AnhydroBeads, −10 mesh, 99.99% trace metals basis