440159

Sigma-Aldrich

3-(Trimethoxysilyl)propyl methacrylate

98%

Sinónimos:
Silane A174, [3-(Methacryloyloxy)propyl]trimethoxysilane
Fórmula lineal:
H2C=C(CH3)CO2(CH2)3Si(OCH3)3
Número de CAS:
Peso molecular:
248.35
Beilstein/REAXYS Number:
1952435
EC Number:
MDL number:
PubChem Substance ID:
NACRES:
NA.23

Quality Level

assay

98%

form

liquid

impurities

1% methyl alcohol from hydrolysis

refractive index

n20/D 1.431 (lit.)

bp

190 °C (lit.)

density

1.045 g/mL at 25 °C (lit.)

SMILES string

CO[Si](CCCOC(=O)C(C)=C)(OC)OC

InChI

1S/C10H20O5Si/c1-9(2)10(11)15-7-6-8-16(12-3,13-4)14-5/h1,6-8H2,2-5H3

InChI key

XDLMVUHYZWKMMD-UHFFFAOYSA-N

¿Está buscando productos similares? Visit Guía de comparación de productos

Packaging

100, 500 mL in Sure/Seal™

storage_class_code

10 - Combustible liquids

WGK Germany

WGK 1

Flash Point F

197.6 °F - closed cup

Flash Point C

92 °C - closed cup

Personal Protective Equipment

dust mask type N95 (US),Eyeshields,Gloves

Certificado de Análisis

Certificado de origen

José Luís Dores-Sousa et al.
Analytica chimica acta, 1124, 176-183 (2020-06-15)
This study targets the synthesis of high external-porosity poly(styrene-co-divinylbenzene) monolithic support structures with macropore and globule sizes in the sub-micron range, aiming at the realization of high-speed and high-resolution gradient separations of intact proteins and peptides. The thermodynamic and kinetic...
Guangwei Lu et al.
ACS omega, 5(30), 19255-19267 (2020-08-11)
In this study, organically modified montmorillonite (OMMT) was prepared by modifying MMT with a cationic surfactant cetyltrimethylammonium bromide (CTAB). The obtained OMMT of different loading contents (1, 2, 4, 6, and 8 wt %) was melt-blended with poly(acrylonitrile-co-butadiene-co-styrene) (ABS) to...
Juyeol Bae et al.
Nature communications, 10(1), 3209-3209 (2019-07-22)
Liquid foam consists of liquid film networks. The films can be thinned to the nanoscale via evaporation and have potential in bottom-up material structuring applications. However, their use has been limited due to their dynamic fluidity, complex topological changes, and...
Hassan Y Hijazi et al.
Journal of chromatography. A, 1617, 460824-460824 (2020-01-26)
A tailor-made porous molecularly imprinted polymer (MIP) thin-film was prepared by in situ photo-radical polymerization on a glass slide and used as a microextraction adsorbent. Detection was carried out using gas chromatography-mass spectrometry (GC-MS) to afford a method suitable for...
José Renato Cavalcanti Queiroz et al.
Dental materials : official publication of the Academy of Dental Materials, 28(2), 189-196 (2011-11-01)
This study characterized the feldspathic ceramic surfaces after various silanization protocols. Ceramic bars (2 mm × 4 mm × 10 mm) (N = 18) of feldpathic ceramic (VM7, VITA Zahnfabrik) were manufactured and finished. Before silane application, the specimens were...
Artículos
With dentists placing nearly 100 million dental fillings into patients′ teeth annually in the U.S. alone, polymeric composite restoratives account for a very large share of the biomaterials market.
Más información
Professor Aran (Claremont University, USA) thoroughly discusses the engineering of graphene based materials through careful functionalization of graphene oxide, a solution processable form of graphene.
Más información

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico