Przejdź do zawartości
Merck
  • Influence of the selective EDTA derivative phenyldiaminetetraacetic acid on the speciation and extraction of heavy metals from a contaminated soil.

Influence of the selective EDTA derivative phenyldiaminetetraacetic acid on the speciation and extraction of heavy metals from a contaminated soil.

Chemosphere (2014-05-31)
Tao Zhang, Hang Wei, Xiu-Hong Yang, Bing Xia, Jun-Min Liu, Cheng-Yong Su, Rong-Liang Qiu
ABSTRAKT

The development of more selective chelators for the washing of heavy metal contaminated soil is desirable in order to avoid excessive dissolution of soil minerals. Speciation and mobility of Cu, Zn, Pb, and Ni in a contaminated soil washed with phenyldiaminetetraacetic acid (PDTA), a derivative of EDTA, were investigated by batch leaching test using a range of soil washing conditions followed by sequential extraction. With appropriate washing conditions, PDTA significantly enhanced extraction of Cu from the contaminated soil. The primary mechanisms of Cu extraction by PDTA were complexation-promoted dissolution of soil Cu and increased dissolution of soil organic matter (SOM). PDTA showed high selectivity for Cu(II) over soil component cations (Ca(II), Mg(II), Fe(III), Mn(II), Al(III)), especially at lower liquid-to-soil ratios under PDTA deficiency, thus avoiding unwanted dissolution of soil minerals during the soil washing process which can degrade soil structure and interfere with future land use. PDTA-enhanced soil washing increased the exchangeable fractions of Cu, Zn, and Pb and decreased their residual fractions, compared to their levels in unwashed soil.

MATERIAŁY
Numer produktu
Marka
Opis produktu

Continuous cast copper (O), BCR®, certified reference material, rod
Copper - O.F.H.C., foil, 150x150mm, thickness 0.25mm, annealed, 99.95+%
Sigma-Aldrich
Copper, wire, diam. 1.0 mm, ≥99.9%
Copper, rod, 100mm, diameter 16mm, as drawn, 99.99+%
Sigma-Aldrich
Ethylenediaminetetraacetic acid disodium salt dihydrate, BioUltra, ≥99.0% (T)
Sigma-Aldrich
Copper, powder, <75 μm, 99%
Sigma-Aldrich
Ethylenediaminetetraacetic acid disodium salt dihydrate, suitable for electrophoresis, Molecular Biology, 99.0-101.0% (titration)
Sigma-Aldrich
Ethylenediaminetetraacetic acid disodium salt dihydrate, BioUltra, 98.5-101.5%
Sigma-Aldrich
Ethylenediaminetetraacetic acid disodium salt dihydrate, meets analytical specification of Ph. Eur., BP, USP, FCC, 99.0-101.0%
Sigma-Aldrich
Ethylenediaminetetraacetic acid disodium salt dihydrate, reagent grade, 98.5-101.5% (titration)
Sigma-Aldrich
Ethylenediaminetetraacetic acid disodium salt dihydrate, ACS reagent, 99.0-101.0%
Supelco
Ethylenediaminetetraacetic acid disodium salt dihydrate, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Ethylenediaminetetraacetic acid disodium salt dihydrate, Sigma Grade, suitable for plant cell culture, 98.5-101.5%
Sigma-Aldrich
Ethylenediaminetetraacetic acid calcium disodium salt hydrate
Sigma-Aldrich
Ethylenediaminetetraacetic acid disodium salt dihydrate, ≥97.0% (KT)
USP
disodu edetynian, United States Pharmacopeia (USP) Reference Standard
Copper - O.F.H.C., foil, 25x25mm, thickness 0.25mm, annealed, 99.95+%
Copper, wire reel, 500m, diameter 0.5mm, annealed, 99.9%
Copper - O.F.H.C., foil, 100x100mm, thickness, 0.5mm, half hard, flattened, polished on both sides, 99.95+%
Sigma-Aldrich
Copper, turnings, purum p.a., ≥99.0%
Copper, wire reel, 1000m, diameter 0.125mm, annealed, 99.9%
Sigma-Aldrich
Copper, wire, diam. 0.64 mm, 99.995% trace metals basis
Copper, wire reel, 1m, diameter 0.01mm, hard, 99.99%
Copper - O.F.H.C., foil, light tested, 150x150mm, thickness 0.05mm, annealed, 99.95+%
Copper, rod, 100mm, diameter 4.8mm, hard, 99.9%
Sigma-Aldrich
Copper, foil, ≥99.8% (complexometric)
Copper, wire reel, 200m, diameter 0.5mm, annealed, silver plated, 99.9%
Copper - O.F.H.C., wire reel, 10m, diameter 0.25mm, as drawn, 99.95+%
Copper, wire reel, 5m, diameter 0.05mm, as drawn, 99.99+%
Sigma-Aldrich
Copper, beads, 2-8 mm, 99.9995% trace metals basis