材料
polyethersulfone
polypropylene screen
polyurethane adhesive
品質等級
製造商/商標名
Pellicon®
參數
0.33 bar max. transmembrane pressure (5 psig) (reverse)
4-6 L/min recirculation rate at 1.4 bar (20 psi)
7 bar max. transmembrane pressure (100 psig) at 30 °C (forward)
技術
analytical sample preparation: suitable
protein purification: suitable
高度
7.6 cm (3 in.)
長度
21 cm (8.3 in.)
寬度
17.8 cm (7.0 in.)
過濾面積
2.5 m2
膜標稱面積
2.5 m2
重量法萃取物
≤1500 mg/m2
基質
Biomax®
孔徑
10 kDa NMWCO
pH值
1-14
尋找類似的產品? 前往 產品比較指南
1 of 4
本產品 | P2B008A25 | P2B01MC25 | P2B005A25 |
|---|---|---|---|
| matrix Biomax® | matrix Biomax® | matrix Biomax® | matrix Biomax® |
| pore size 10 kDa NMWCO | pore size 8 kDa NMWCO | pore size 1000 kDa NMWCO | pore size 5 kDa NMWCO |
| material polyethersulfone , polyurethane adhesive, polypropylene screen | material polyethersulfone , polypropylene screen, polyurethane adhesive | material polyethersulfone , polypropylene screen, polyurethane adhesive | material polyethersulfone , polypropylene screen, polyurethane adhesive |
| technique(s) analytical sample preparation: suitable, protein purification: suitable | technique(s) analytical sample preparation: suitable, protein purification: suitable | technique(s) analytical sample preparation: suitable, protein purification: suitable | technique(s) analytical sample preparation: suitable, protein purification: suitable |
| parameter 0.33 bar max. transmembrane pressure (5 psig) (reverse), 7 bar max. transmembrane pressure (100 psig) at 30 °C (forward) | parameter 0.33 bar max. transmembrane pressure (5 psig) (reverse), 4-6 L/min recirculation rate at 1.4 bar (20 psi), 7 bar max. transmembrane pressure (100 psig) at 30 °C (forward) | parameter 0.33 bar max. transmembrane pressure (5 psig) (reverse), 5-35 L/min recirculation rate at 0.4 bar (6 psi), 7 bar max. transmembrane pressure (100 psig) at 30 °C (forward) | parameter 0.33 bar max. transmembrane pressure (5 psig) (reverse), 4-6 L/min recirculation rate at 1.4 bar (20 psi), 7 bar max. transmembrane pressure (100 psig) at 30 °C (forward) |
| manufacturer/tradename Pellicon® | manufacturer/tradename Pellicon® | manufacturer/tradename Pellicon® | manufacturer/tradename Pellicon® |
一般說明
Millipore′s BIOMAX 10 polyethersulfone membrane has void-free structures that guard against leakage of solutes through microdefects normally associated with voids beneath the thin skins of conventional UF membranes. These void-free membranes are more permeable, resulting in high-flux with equivalent or superior product retention. These void-free membranes provide the advantages of fast, high yield processing and smaller systems.
The Pellicon® 2 Maxi Ultrafiltration BIOMAX Module feature a filtration area of 2.5 m2 with a pore size of 10 kDa NMWCO.
應用
- Protein solutions
- Polysaccharide solutions
- Virus suspensions
Harvest, washing or clarification of:
- Cell cultures and lysates
- Colloidal suspensions
- Viral cultures
特點和優勢
- Type A screen (tight screen)
- Leading-edge void- free membranes to match virtually any separation challenge
- Short flow path for higher flux and higher resolution separation capability
- Choice of flow channel configuration providing process optimization capability
- Predictable, fast, scale-up
- True linear scalability from laboratory size modules to industrial assemblies for processing thousands of liters
- Brings higher resolution, improved yields and superior back-pressure resistance
- Ultracel membranes are composite membranes cast on a microporous substrate for defect-free membranes with superior
分析報告
其他說明
法律資訊
儲存類別代碼
10 - Combustible liquids
水污染物質分類(WGK)
WGK 2
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號,寫有 ‘Lot’或‘Batch’.。
Active Filters
我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務