Refractory open-angle glaucoma after neodymium-yttrium-aluminum-garnet laser lysis of vitreous floaters.

Refractory open-angle glaucoma after neodymium-yttrium-aluminum-garnet laser lysis of vitreous floaters.

American journal of ophthalmology (2014-10-14)

Lisa A Cowan, Kay T Khine, Vikas Chopra, Doreen T Fazio, Brian A Francis

ABSTRACT

To illustrate 3 cases of chronic open-angle glaucoma secondary to the neodymium-yttrium-aluminum-garnet (Nd:YAG) laser vitreolysis procedure for symptomatic vitreous floaters. Observational case series. Location of the study was the Doheny Eye Institute. Three eyes of 2 patients who developed chronic open-angle glaucoma after Nd:YAG vitreolysis for symptomatic floaters presenting with very high intraocular pressure (IOP >40 mm Hg) were selected. The time from the laser treatment to the onset of elevated pressure ranges from 1 week to 8 months. There was no associated inflammation, steroid use, or other identifiable cause of chronic IOP elevation. All eyes were treated initially with glaucoma medication, followed by selective laser trabeculoplasty (SLT) and eventually glaucoma surgery (Trabectome) in 2 eyes for disease management. In all eyes, intraocular pressures were eventually stabilized within a normal pressure range from 18 to 38 months following Nd:YAG vitreolysis. At the latest follow-up post surgery, all eyes had intraocular pressures of 22 mm Hg or less with or without medications. Secondary open-angle glaucoma is a complication of Nd:YAG vitreolysis for symptomatic floaters that may present with an increase in intraocular pressure immediately, or many months after the surgery. Furthermore this complication may be permanent and require chronic medical therapy or glaucoma surgery.

MATERIALS

Product Number

Brand

Product Description

GF70373505

Aluminum, microleaf disks, 10mm, thinness 1.0μm, specific density 269.9μg/cm², removable support, 99.999%

GF53821234

Aluminum, mesh, 900x900mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh

GF84145462

Aluminum, microfoil, disks, 25mm, thinness 1.0μm, specific density 269.9μg/cm², permanent mylar 3.5μm support, 99.999%

GF27426944

Aluminum, insulated wire, 2m, conductor diameter 0.1mm, insulation thickness 0.005mm, polyimide insulation, 99.95+%

GF82284408

Aluminum, microleaf disks, 25mm, thinness 0.15μm, specific density 41.28μg/cm², removable support, 99.999%

GF85927056

Aluminum, microleaf disks, 25mm, thinness 0.5μm, specific density 120.6μg/cm², removable support, 99.999%

GF43419416

Aluminum, insulated wire, 1m, conductor diameter 0.1mm, insulation thickness 0.005mm, polyimide insulation, 99.95+%

GF47839124

Aluminum, insulated wire, 20m, conductor diameter 0.1mm, insulation thickness 0.005mm, polyimide insulation, 99.95+%

GF63970498

Aluminum, honeycomb, 300x300mm, thickness 26.5mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm³, phenolic adhesive (resin), facing skin carbon fiber / epoxy, 99.9%

GF02763963

Yttrium, wire reel, 0.1m, diameter 0.5mm, 99.9%

GF96312326

Aluminum, honeycomb, 600x600mm, thickness 26.5mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm³, phenolic adhesive (resin), facing skin carbon fiber / epoxy, 99.9%

GF33610395

Aluminum, foam, 300x400mm, thickness 6.35mm, bulk density 0.2g/cm³, porosity 0.93, aluminum 6101 grade, 98.5%

GF86118969

Aluminum, honeycomb, 300x300mm, thickness 5mm, cell size 19mm, cell wall 0.064mm, core density 0.029g/cm³, phenolic adhesive (resin), 99.5%

GF87997000

Aluminum, honeycomb, 300x300mm, thickness 20mm, cell size 4.8mm, cell wall 0.038mm, core density 0.070g/cm³, phenolic adhesive (resin), 99.5%

GF98440027

Aluminum, honeycomb, 600x600mm, thickness 10mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm³, phenolic adhesive (resin), 99.5%

GF33400224

Aluminum, honeycomb, 600x600mm, thickness 52.3mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm³, phenolic adhesive (resin), facing skin glass fiber 0.75mm, 99.9%

GF31987525

Aluminum, honeycomb, 300x300mm, thickness 10mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm³, phenolic adhesive (resin), 99.5%

773972

Sigma-Aldrich

Yttrium sputtering target, diam. × thickness 2.00 in. × 0.25 in., 99.9% trace metals basis

GF10029596

Aluminum, foam, 150x150mm, thickness 6.35mm, bulk density 0.2g/cm³, porosity 0.93, 8 pores/cm, aluminum 6101 grade, 98.5%

GF86572042

Aluminum, rod, 100mm, diameter 12.0mm, as drawn, 99.999%

GF93309037

Aluminum, tube, 200mm, outside diameter 1.42mm, inside diameter 1.166mm, wall thickness 0.127mm, as drawn, 99.5%

GF06197014

Aluminum, rod, 200mm, diameter 10.0mm, as drawn, 99.999%

GF32029444

Aluminum, rod, 100mm, diameter 12.7mm, 99%

GF28125390

Aluminum, tube, 200mm, outside diameter 0.30mm, inside diameter 0.2mm, wall thickness 0.05mm, as drawn, 99.5%

GF31334093

Aluminum, wire reel, 0.5m, diameter 0.5mm, as drawn, 99.999%

GF53651796

Aluminum, tube, 1000mm, outside diameter 1.42mm, inside diameter 1.166mm, wall thickness 0.127mm, as drawn, 99.5%

GF54273944

Aluminum, tube, 500mm, outside diameter 0.55mm, inside diameter 0.4mm, wall thickness 0.075mm, as drawn, 99.5%

GF51598761

Aluminum, rod, 200mm, diameter 12.7mm, 99%

GF36586042

Aluminum, rod, 100mm, diameter 20.0mm, as drawn, 99.999%

GF21896039

Aluminum, rod, 200mm, diameter 12.0mm, as drawn, 99.999%