This is a 300 gram spool of PVA. The diameter of the filliment is 2.85 mm and the length is approximate 38 meters.
901031
Polyvinyl alcohol (PVA) printing filament
2.85 mm
別名:
AquaSolve™, PVA filament
で組織・契約価格をご覧ください。
サイズを選択してください
表示を変更する
| あなたへ/カタログ番号 | 在庫状況 | 単価 |
|---|---|---|
1 ea | カートの在庫状況を確認する | ￥8,200 |
この商品について
description
Filament diameter: 2.85 ± 0.10 mm, Filament roundness: ≥95%, Melt flow rate: 14-20 g/10 min, Melt temperature: ± 163 °C, Print temperature: ±180-205 °C, Specific gravity: 1.23 g/cc, Spool hub diameter: 52 mm, Spool size (D x H): 200 mm x 55 mm, Viscat softening temperature: ± 60.2 °C
form
solid (filament)
color
colorless
InChI
1S/C2H4O/c1-2-3/h2-3H,1H2
InChI key
IMROMDMJAWUWLK-UHFFFAOYSA-N
General description
Polyvinyl alcohol (PVA) printing filament is a water-soluble support material for multi-extrusion 3D printing of complex architectures. PVA is widely used in traditional industries, such as textiles and papermaking, as well as a wide variety of coatings. This colorless, odorless, and high-quality filament extrudes between 180 to 205 °C and is suitable with all RepRap technology-based desktop 3D printers, such as MakerBot, Ultimaker, RepRap (Mendel, Huxley, Prusa), UP!, Solidoodle, Leapfrog, etc. PVA features good adhesion to PLA and nylon materials and is biodegradable in water with no hazardous by-products. While PVA is soluble in cold water, the dissolution process can be accelerated by using a continuously heated bath of warm water. When not in use, the filament should be stored at room temperature in dry conditions, such as in a sealed plastic bag or in a closed container with desiccant. Recommended initial printer settings can be found in the ′General Print Settings′ file.
Application
Due to its water-solubility and biocompatibility, polyvinyl alcohol (PVA) filaments are most commonly used as a sacrificial material in the formation of tissue engineering constructs with unique and complicated architectures.[1][2][3] The use of this material allows for the printing of scaffolds with large overhangs, deep internal cavities, and/or intricate geometries. In addition to their use as sacrificial materials, PVA filaments have also been used to print novel oral drug delivery devices and tablets.[4][5][6]
Legal Information
Product of Formfutura VOF
AquaSolve is a trademark of Formfutura VOF
1 of 1
当該品目 | |||
|---|---|---|---|
| form solid (filament) | form solid (filament) | form powder | form crystalline powder, crystals or granules |
| description Filament diameter: 2.85 ± 0.10 mm, Melt flow rate: 14-20 g/10 min, Print temperature: ±180-205 °C, Spool hub diameter: 52 mm, Viscat softening temperature: ± 60.2 °C, Filament roundness: ≥95%, Specific gravity: 1.23 g/cc, Melt temperature: ± 163 °C, Spool size (D x H): 200 mm x 55 mm | description Filament diameter: 1.75 ± 0.05 mm, Filament roundness: ≥95%, Melt flow rate: 14-20 g/10 min, Melt temperature: ± 163 °C, Print temperature: ±180-205 °C, Specific gravity: 1.23 g/cc, Spool Hub Diameter: 52 mm, Spool Size (D x H): 200 mm x 55 mm, Viscat softening temperature: ± 60.2 °C | description - | description - |
| color colorless | color colorless | color - | color - |
Still not finding the right product?
Explore all of our products under Polyvinyl alcohol (PVA) printing filament
保管分類
11 - Combustible Solids
wgk
WGK 1
flash_point_f
49.5 °F
flash_point_c
9.7 °C
適用法令
試験研究用途を考慮した関連法令を主に挙げております。化学物質以外については、一部の情報のみ提供しています。 製品を安全かつ合法的に使用することは、使用者の義務です。最新情報により修正される場合があります。WEBの反映には時間を要することがあるため、適宜SDSをご参照ください。
Substances Subject to be Indicated Names
ishl_indicated
Substances Subject to be Notified Names
ishl_notified