Passa al contenuto
Merck
  • Trace-chitosan-wrapped multi-walled carbon nanotubes as a new sorbent in dispersive micro solid-phase extraction to determine phenolic compounds.

Trace-chitosan-wrapped multi-walled carbon nanotubes as a new sorbent in dispersive micro solid-phase extraction to determine phenolic compounds.

Journal of chromatography. A (2015-03-10)
Wan Cao, Shuai-Shuai Hu, Li-Hong Ye, Jun Cao, Jing-Jing Xu, Xiao-Qing Pang
ABSTRACT

This report describes the use of trace-chitosan-wrapped multi-walled carbon nanotubes (CS-MWCNTs) as a sorbent material in dispersive micro solid-phase extraction (DMSPE), which was combined with ultra-high-performance liquid chromatography coupled with quadrupole time-of-flight tandem mass spectrometry to analyze phenolic compounds in chrysanthemum tea and a chrysanthemum beverage. In this study, for the first time, CS-MWCNTs were used as a sorbent for this microextraction mode. Moreover, the proposed method exhibits the advantages of simplicity, rapidity, small sample amount and ease of operation. Furthermore, all of the important parameters that affect the extraction efficiency, such as the sorbent, pH, extraction time and type of elution solvent, were investigated and optimized in the DMSPE. Under the optimized extraction condition, the limit of detection, which was calculated based on a signal-to-noise ratio of 3, was 0.22-16.19ngmL(-1). Satisfactory recovery values of 89-106% were obtained for the tested samples. The results show that the developed method was successfully applied to determine the content of chlorogenic acid and flavonoids in complex chrysanthemum samples.

MATERIALI
Numero di prodotto
Marchio
Descrizione del prodotto

Sigma-Aldrich
Acetonitrile, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Metanolo, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Metanolo, ACS reagent, ≥99.8%
Sigma-Aldrich
Metanolo, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Acetonitrile, HPLC Plus, ≥99.9%
Sigma-Aldrich
Acido formico, reagent grade, ≥95%
Sigma-Aldrich
Metanolo, HPLC Plus, ≥99.9%
Sigma-Aldrich
Esano, suitable for HPLC, ≥97.0% (GC)
Sigma-Aldrich
Acetonitrile, ACS reagent, ≥99.5%
Sigma-Aldrich
Esano, ReagentPlus®, ≥99%
Sigma-Aldrich
Bromuro di potassio, ≥99% trace metals basis
Sigma-Aldrich
Esano, suitable for HPLC, ≥95%
Sigma-Aldrich
Acido formico, ACS reagent, ≥96%
Sigma-Aldrich
Acetonitrile, anhydrous, 99.8%
Sigma-Aldrich
Acido formico, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥98%
Sigma-Aldrich
Metanolo, anhydrous, 99.8%
Sigma-Aldrich
Esano, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99% (GC)
Sigma-Aldrich
Acetonitrile, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Acetonitrile, ≥99.9% (GC)
Sigma-Aldrich
Esano, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Sigma-Aldrich
Bromuro di potassio, ACS reagent, ≥99.0%
Sigma-Aldrich
Acido formico, puriss., meets analytical specifications of DAC, FCC, 98.0-100%
Sigma-Aldrich
Metanolo, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Metanolo, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
Metanolo, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
Acido formico, ACS reagent, ≥88%
Sigma-Aldrich
Metanolo, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Esano, Laboratory Reagent, ≥95%
Sigma-Aldrich
Metanolo, ACS reagent, ≥99.8%
Sigma-Aldrich
Metanolo, Absolute - Acetone free