Millipak® Express Filter

0.22 µm membrane filter for particulate-free and bacteria-free water at the point of dispense, For use with Direct-Q®, Synergy® and Milli-Q® Academic / Biocel / Element / Synthesis / Gradient systems

Millipak® Express 20 Filter


filter (polyethersulfone)
styrene-acrylonitrile (SAN) housing




removal of particulates and bacteria





Dimension de pores

0.22 μm pore size


for use with Direct-Q® UV
for use with Direct-Q®
for use with Milli-Q® Academic
for use with Milli-Q® Biocel
for use with Milli-Q® Element
for use with Milli-Q® Gradient
for use with Milli-Q® Synthesis
for use with Synergy® UV
for use with Synergy®

Expédié(e)(s) dans


Vous recherchez des produits similaires ? Visit Guide de comparaison des produits

Catégories apparentées

Description générale

The Millipak® 0.22 μm hydrophilic membrane filter is intended to produce particulate- and bacteria-free water at the point of dispense of the water purification systems. The filter is designed with a 0.22 μm PES (polyethersulfone) asymmetric membrane filter heat-sealed on a styrene acrylonitrile housing. This minimizes organic and inorganic extractable release.


Purified water filtered through this filter can be used in any laboratory work where water free of bacteria or particulates is needed.

Caractéristiques et avantages

  • The unit is designed as a safe and efficient barrier against particulates and bacteria.
  • The membrane′s conical pores allow a high flow rate at a low differential pressure.
  • The membrane, housing material, and production processes have been selected to minimize organic and inorganic extractable release.
  • The membrane is supported by a rigid plastic disc with channels that ensures high water flow and resistance to pressure variations without the risk of membrane rupture.
  • Connects to the outlet of the water delivery point, such as the PODs of Milli-Q® water purification systems.
  • The protective bell protects against intrusion of airborne bacteria contamination during dispensing.
  • Care-free maintenance: the filter is easily fitted and replaced.
  • Non-sterile. Delivered hermetically sealed, with its Certificate of Quality.

Autres remarques

Directions for Use

  • Organism Retention: Microorganisms
  • Mode of Action: Filtering
  • Application: General laboratory analysis
  • Intended Use: Water purification
  • Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes, and is considered to be a pesticide device under FIFRA . Refer to system equipment user guide section "Using the System" (available on USB key in the system box)
  • Storage Statement: Store in dry location
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Informations légales

DIRECT-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
SYNERGY is a registered trademark of Merck KGaA, Darmstadt, Germany

Certificat d'analyse

Certificat d'origine

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique