Przejdź do zawartości
Merck

Diagnostic use of cerebral and extracerebral oxysterols.

Clinical chemistry and laboratory medicine (2004-04-06)
Valerio Leoni, Thomas Masterman, Fariba S Mousavi, Bengt Wretlind, Lars-Olof Wahlund, Ulf Diczfalusy, Jan Hillert, Ingemar Björkhem
ABSTRAKT

24S-Hydroxycholesterol (24OHC) and 27-hydroxycholesterol (27OHC) are two structurally similar oxysterols of different origins--the former almost exclusively formed in the brain and the latter formed to a lesser extent in the brain than in most other organs. HYPOTHESIS TO BE TESTED: Neuronal damage and/or demyelination causes increased flux of 24OHC from the brain into the cerebrospinal fluid (CSF), whereas a defect blood-brain barrier causes increased flux of 27OHC from the circulation into the CSF. Isotope dilution-mass spectrometry was used to assay the two oxysterols in CSF and plasma from more than 250 patients with different neurological and geriatric diseases. The CSF-levels of the two oxysterols were much more affected by the different diseases than the plasma levels. Patients with active demyelinating diseases had increased levels of 24OHC in CSF with a relatively high 24OHC/27OHC ratio. Patients with meningitis in general had high levels of both steroids with a low 24OHC/27OHC ratio. Patients with Alzheimer's disease had slightly increased levels of 24OHC in CSF with less increase in 27OHC. Patients with multiple sclerosis had a tendency to have higher levels of 24OHC during active periods with a high 24OHC/ 27OHC ratio. Measurements of the two oxysterols in CSF and plasma may add significantly to existing biochemical methods for evaluation of neurological diseases.

MATERIAŁY
Numer produktu
Marka
Opis produktu

Supelco
Glycine, analytical standard, for nitrogen determination according to Kjeldahl method
Supelco
L-Threonine, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Supelco
L-Proline, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Supelco
L-Valine, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Supelco
L-Cystine, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Sigma-Aldrich
Cobalt, Carbon coated magnetic, nanopowder, <50 nm particle size (TEM), ≥99%
Sigma-Aldrich
Zinc, pieces, 2-14 mesh, 99.9% trace metals basis
Sigma-Aldrich
Tin, granular, 0.425-2.0 mm particle size, ≥99.5%, ACS reagent
Sigma-Aldrich
Zinc, sticks, diam. 7-10 mm, 99.97% trace metals basis
Sigma-Aldrich
Molybdenum, powder, <150 μm, 99.99% trace metals basis
Sigma-Aldrich
Tungsten, foil, thickness 0.25 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Zinc, foil, thickness 1.0 mm, 99.99% trace metals basis
Sigma-Aldrich
Zinc, shot, <12 mm, 99.99% trace metals basis
Sigma-Aldrich
Chromium, powder, ≥99% trace metals basis, <45 μm
Sigma-Aldrich
Vanadium, powder, −325 mesh, 99.5% trace metals basis
Sigma-Aldrich
Zinc, foil, thickness 0.25 mm, 99.999% trace metals basis
Sigma-Aldrich
Strontium, dendritic pieces, purified by distillation, 99.9% trace metals basis
Sigma-Aldrich
Copper, foil, thickness 0.025 mm, 99.98% trace metals basis
Sigma-Aldrich
Titanium, wire, diam. 1.0 mm, 99.99% trace metals basis
Sigma-Aldrich
Manganese, powder, ≥99.9% trace metals basis
Sigma-Aldrich
Copper, powder, <75 μm, 99%
Sigma-Aldrich
Glycine, 99%, FCC
Sigma-Aldrich
Manganese, chips, thickness <2.0 mm, 99%
Sigma-Aldrich
Copper, foil, thickness 0.5 mm, 99.98% trace metals basis
Sigma-Aldrich
Nickel, foil, thickness 0.5 mm, 99.98% trace metals basis
Sigma-Aldrich
Copper, wire, diam. 1.0 mm, ≥99.9%
Sigma-Aldrich
L-Proline, 99%, FCC, FG
Sigma-Aldrich
Zinc preparation, 5 g/dL Zn2+ in THF, highly reactive Rieke®metal
Sigma-Aldrich
Titanium, foil, thickness 2.0 mm, 99.7% trace metals basis
Sigma-Aldrich
Manganese, powder, −325 mesh, ≥99% trace metals basis