Przejdź do zawartości
Merck

Stability studies of antiandrogenic compounds in Curcuma aeruginosa Roxb. extract.

The Journal of pharmacy and pharmacology (2014-06-07)
Nungruthai Suphrom, Jukkarin Srivilai, Ganniga Pumthong, Nantaka Khorana, Neti Waranuch, Nanteetip Limpeanchob, Kornkanok Ingkaninan
ABSTRAKT

Curcuma aeruginosa Roxb. extract is a 5α-reductase antagonist that can be used to treat hair loss. We aimed to study the stability of antiandrogenic constituents, germacrone and other sesquiterpene components in the extract. Germacrone and the extract were analyzed as solid forms or solublized with polyethylene glycol-40 (PEG-40) or methanol using high-performance liquid chromatography and gas chromatography with flame ionization detector. The effects of pH, temperature and light on their stability were studied. Degradation of antiandrogenic compounds in C. aeruginosa was highly sensitive to temperature especially pure anhydrous germacrone, which was completely lost within 3 days at 45°C. Curiously, degradation was slower than as a dried extract. Paradoxically, when solubilized with PEG-40, it was largely intact even after 90 days at 45°C. The MS spectrum of a major degradation product suggested that it was elemenone probably produced by Cope rearrangement. Two other putative degradation products were germacrone-1,10-epoxide and germacrone-4,5-epoxide suggesting that oxidation of double bonds was an important mechanism. Germacrone stability was unaffected by pH (2.0-9.0) but only as dried extract it was slightly degraded by light. Antiandrogenic constituents of C. aeruginosa were instable at high temperature and in solid form. Thus, the extract would be optimately stored as a solution or otherwise as solid form at low temperature.

MATERIAŁY
Numer produktu
Marka
Opis produktu

Supelco
L-Lysine monohydrochloride, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Millipore
Bifido Selective Supplement B, suitable for microbiology
Sigma-Aldrich
L-Lysine monohydrochloride, BioUltra, ≥99.5% (AT)
Sigma-Aldrich
Sodium phosphate dibasic, purum p.a., anhydrous, ≥98.0% (T)
Sigma-Aldrich
Potassium hydroxide, tested according to Ph. Eur.
Sigma-Aldrich
Phosphoric acid, 85 wt. % in H2O, 99.99% trace metals basis
Sigma-Aldrich
Sodium phosphate dibasic, 99.95% trace metals basis
Supelco
L-Lysine monohydrochloride, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
5α-Androstan-17β-ol-3-one, VETRANAL®, analytical standard
Sigma-Aldrich
Phosphoric acid-16O4 solution, 70 wt. % in D2O, 99.9 atom % 16O
Sigma-Aldrich
Sodium phosphate dibasic, BioReagent, suitable for cell culture, suitable for insect cell culture, ≥99.0%
Sigma-Aldrich
Phosphoric acid, BioReagent, suitable for insect cell culture, 85%
Sigma-Aldrich
Sodium phosphate dibasic, ReagentPlus®, ≥99.0%
Sigma-Aldrich
Sodium phosphate dibasic, Molecular Biology, ≥98.5% (titration)
Sigma-Aldrich
5α-Androstan-17β-ol-3-one, ≥97.5%
Sigma-Aldrich
L-Lysine monohydrochloride, from non-animal source, meets EP, JP, USP testing specifications, suitable for cell culture, 98.5-101.0%
Sigma-Aldrich
L-Lysine monohydrochloride, reagent grade, ≥98% (HPLC)
Supelco
L-Lysine hydrochloride solution, 100 mM amino acid in 0.1 M HCl, analytical standard
Sigma-Aldrich
Phosphoric acid, crystalline, ≥99.999% trace metals basis
Sigma-Aldrich
5α-Androstan-17β-ol-3-one, purum, ≥99.0% (TLC)
Sigma-Aldrich
Sodium phosphate dibasic, BioUltra, Molecular Biology, ≥99.5% (T)
Sigma-Aldrich
Phosphoric acid, ≥85 wt. % in H2O, ≥99.999% trace metals basis
Sigma-Aldrich
Phosphoric acid, BioUltra, ≥85% (T)
Sigma-Aldrich
Sodium phosphate dibasic, BioXtra, ≥99.0%
Sigma-Aldrich
Sodium phosphate dibasic, BioReagent, suitable for cell culture, suitable for insect cell culture, ≥99.0%, free-flowing, Redi-Dri
Sigma-Aldrich
Potassium hydroxide, ≥99.95% trace metals basis
Sigma-Aldrich
Phosphoric acid, ACS reagent, ≥85 wt. % in H2O
Sigma-Aldrich
Sodium phosphate dibasic, puriss. p.a., ACS reagent, anhydrous, ≥99.0% (T)
Sigma-Aldrich
Potassium hydroxide, ≥85% KOH basis, pellets, white
Sigma-Aldrich
Sodium phosphate dibasic, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, E 339, anhydrous, 98-100.5% (calc. to the dried substance)