Skip to Content
MilliporeSigma
  • Bioavailability of iron, zinc, folic acid, and vitamin A from fortified maize.

Bioavailability of iron, zinc, folic acid, and vitamin A from fortified maize.

Annals of the New York Academy of Sciences (2013-12-18)
Diego Moretti, Ralf Biebinger, Maaike J Bruins, Birgit Hoeft, Klaus Kraemer
ABSTRACT

Several strategies appear suitable to improve iron and zinc bioavailability from fortified maize, and fortification per se will increase the intake of bioavailable iron and zinc. Corn masa flour or whole maize should be fortified with sodium iron ethylenediaminetetraacetate (NaFeEDTA), ferrous fumarate, or ferrous sulfate, and degermed corn flour should be fortified with ferrous sulfate or ferrous fumarate. The choice of zinc fortificant appears to have a limited impact on zinc bioavailability. Phytic acid is a major inhibitor of both iron and zinc absorption. Degermination at the mill will reduce phytic acid content, and degermed maize appears to be a suitable vehicle for iron and zinc fortification. Enzymatic phytate degradation may be a suitable home-based technique to enhance the bioavailability of iron and zinc from fortified maize. Bioavailability experiments with low phytic acid-containing maize varieties have suggested an improved zinc bioavailability compared to wild-type counterparts. The bioavailability of folic acid from maize porridge was reported to be slightly higher than from baked wheat bread. The bioavailability of vitamin A provided as encapsulated retinyl esters is generally high and is typically not strongly influenced by the food matrix, but has not been fully investigated in maize.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Zinc, SAJ first grade
Supelco
Folic acid, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Zinc, mossy, ≥99%
Sigma-Aldrich
Zinc, powder, <150 μm, 99.995% trace metals basis
Sigma-Aldrich
Iron, granular, 10-40 mesh, >99.99% trace metals basis
Folic acid, European Pharmacopoeia (EP) Reference Standard
Sigma-Aldrich
Iron, wire, diam. 1.0 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Zinc, foil, thickness 0.25 mm, 99.9% trace metals basis
Sigma-Aldrich
Iron, powder, <10 μm, ≥99.9% trace metals basis
Sigma-Aldrich
Iron, ≥99%, reduced, powder (fine)
Sigma-Aldrich
Zinc, purum, powder
Sigma-Aldrich
Zinc, wire, diam. 1.0 mm, 99.995% trace metals basis
Sigma-Aldrich
Zinc, granular, 30-100 mesh, 99%
Sigma-Aldrich
Folic acid, ≥97%
Sigma-Aldrich
Folic acid, meets USP testing specifications
Sigma-Aldrich
Carbonyl iron, ≥97% Fe basis
Sigma-Aldrich
Folic acid, BioReagent, suitable for cell culture, suitable for insect cell culture, suitable for plant cell culture, ≥97%
Sigma-Aldrich
Iron, foil, thickness 0.25 mm, ≥99.99% trace metals basis
Iron, foil, 6mm disks, thickness 0.0125mm, 99.85%
Iron, foil, not light tested, 100x100mm, thickness 0.0125mm, 99.85%
Iron, foil, 5m coil, thickness 0.025mm, hard, 99.5%
Iron, rod, 1000mm, diameter 6.35mm, as drawn, 98+%
Iron, foil, 8mm disks, thickness 0.005mm, 99.85%
Iron, foil, 50mm disks, thickness 0.125mm, hard, 99.5%
Zinc, wire reel, 5m, diameter 2.0mm, 99.99+%
Iron, foil, not light tested, 100x100mm, thickness 0.0125mm, 99.99+%
Iron, foil, 5m coil, thickness 0.038mm, hard, 99.5%
Iron, foil, light tested, 50x50mm, thickness 0.015mm, 99.99+%
Iron, foil, 8mm disks, thickness 0.25mm, hard, 99.5%
Zinc, wire reel, 200m, diameter 1.0mm, extruded, 99.9%