Preparation of single phase Zn2TiO4 spinel from a new ZnTi layered double hydroxide precursor.

Preparation of single phase Zn2TiO4 spinel from a new ZnTi layered double hydroxide precursor.

Journal of nanoscience and nanotechnology (2014-04-18)

Jianye Song, Mingzhe Leng, Hongdi Xiao, Liangji Zhang, Yaowei Qin, Wanguo Hou, Na Du, Jianqiang Liu

ABSTRACT

A single-source ZnTi-layered double hydroxide precursor was used to prepare single phase Zn2TiO4. This approach involves two steps: the calcination of a ZnTi-layered double hydroxide precursor and selective leaching zinc oxide from the resultant calcined products. The materials were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) thermogravimetric and differential thermal analysis (TG-DTA), transmission electron microscope (TEM), surface area measurement and UVvis diffuse reflection spectroscopy. The results indicated that a single phase Zn2TiO4 could be successfully obtained from a ZnTi-layered double hydroxide precursor at a relatively low temperature in short calcination time. The TEM and SEM show that the diameter of Zn2TiO4 particles prepared at 900 degrees C is in the range of 20-100 nm and smaller than that prepared by the solid-state method. UV-Vis diffuse reflection spectroscopy demonstrates that the material has an energy bandgap around 3.7 eV.

MATERIALS

Product Number

Brand

Product Description

37-0100

Sigma-Aldrich

Zinc, SAJ first grade

30-2730

Sigma-Aldrich

Titanium(IV) oxide, JIS special grade, ≥99.0%

215481

Sigma-Aldrich

Zinc, mossy, ≥99%

433667

Sigma-Aldrich

Titanium, evaporation slug, diam. × L 6.3 mm × 6.3 mm, ≥99.99% trace metals basis

96454

Sigma-Aldrich

Zinc, purum, powder

267481

Sigma-Aldrich

Titanium, foil, thickness 0.25 mm, 99.99% trace metals basis

460397

Sigma-Aldrich

Titanium, foil, thickness 0.127 mm, ≥99.99% trace metals basis

IRMM531A

Titanium, IRMM^®, certified reference material, 0.1 mm foil

565148

Sigma-Aldrich

Zinc, granular, 30-100 mesh, 99%

356018

Sigma-Aldrich

Zinc, foil, thickness 0.25 mm, 99.9% trace metals basis

677469

Sigma-Aldrich

Titanium(IV) oxide, contains 1% Mn as dopant, nanopowder, <100 nm particle size (BET), ≥97%

348805

Sigma-Aldrich

Titanium, foil, thickness 0.5 mm, 99.99% trace metals basis

GF60566700

Zinc, foil, 6mm disks, thickness 0.025mm, as rolled, 99.99+%

GF77250865

Zinc, foil, 4mm disks, thickness 0.025mm, as rolled, 99.95+%

GF43894738

Zinc, foil, 4mm disks, thickness 0.1mm, as rolled, 99.95+%

GF70272581

Zinc, foil, 6mm disks, thickness 0.25mm, as rolled, 99.95+%

GF08557713

Zinc, foil, 5m coil, thickness 0.175mm, as rolled, 99.95+%

GF87420449

Zinc, foil, 4mm disks, thickness 0.5mm, as rolled, 99.95+%

GF60092456

Titanium, tube, 1000mm, outside diameter 0.81mm, inside diameter 0.61mm, wall thickness 0.1mm, as drawn, 99.6+%

GF35682600

Titanium, tube, 200mm, outside diameter 6.1mm, inside diameter 5.1mm, wall thickness 0.5mm, annealed, 99.6+%

GF20610997

Titanium, tube, 1000mm, outside diameter 6.1mm, inside diameter 5.1mm, wall thickness 0.5mm, annealed, 99.6+%

GF79729442

Titanium, tube, 200mm, outside diameter 1.05mm, inside diameter 0.75mm, wall thickness 0.15mm, annealed, 99.6+%

GF06003100

Titanium, tube, 100mm, outside diameter 9.5mm, inside diameter 8.2mm, wall thickness 0.65mm, annealed, 99.6+%

GF37525855

Titanium, tube, 200mm, outside diameter 0.51mm, inside diameter 0.35mm, wall thickness 0.08mm, annealed, 99.6+%

GF14990935

Titanium, tube, 1000mm, outside diameter 10.3mm, inside diameter 8.7mm, wall thickness 0.8mm, annealed, 99.6+%

767506

Sigma-Aldrich

Titanium, sputtering target, diam. × thickness 2.00 in. × 0.25 in., 99.995% trace metals basis

774529

Sigma-Aldrich

Titanium(IV) oxide, nanowires, diam. × L ~10 nm × 10 μm

774510

Sigma-Aldrich

Titanium(IV) oxide, nanowires, diam. × L ~100 nm × 10 μm

GF35446316

Titanium, rod, 100mm, diameter 20mm, annealed, 99.6+%

14021

Sigma-Aldrich

Titanium(IV) oxide, ReagentPlus^®, ≥99%