Skip to Content
MilliporeSigma
  • Sensitivity of Danio rerio (Teleostei, Cyprinidae) during two stages of development based on acute toxicity tests.

Sensitivity of Danio rerio (Teleostei, Cyprinidae) during two stages of development based on acute toxicity tests.

Bulletin of environmental contamination and toxicology (2014-08-30)
R Freiry, J A A Stelzer, L Maltchik, A Arenzon
ABSTRACT

The sensitivity of Danio rerio to three chemicals was compared at two growth stages [larval (10 ± 2 after hatching) and post-larval (60 ± 4 days after hatching)] based on acute toxicity tests. Thirty-nine 48 h acute toxicity tests were performed with the substances CuSO4, NaCl and KCl. The 48 h LC50 values at the two growth stages were compared by independent samples t-tests. The results showed a clear decrease in sensitivity when post-larval organisms were used. Since acute toxicity test methods for D. rerio that recommend using post-larval stage fish do not represent the most sensitive stage of the test organism, our study suggests a revision of the methods to use larval fish.

MATERIALS
Product Number
Brand
Product Description

Supelco
Sodium chloride, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Potassium Chloride, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Potassium chloride, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, E508, 99-100.5% (AT), ≤0.0001% Al
Sigma-Aldrich
Potassium chloride, anhydrous, free-flowing, Redi-Dri, ReagentPlus®, ≥99%
Sigma-Aldrich
Copper(II) sulfate pentahydrate, puriss., suitable for, meets analytical specification of Ph. Eur., BP, USP,FCC
Sigma-Aldrich
Potassium chloride, ACS reagent, 99.0-100.5%
Sigma-Aldrich
Copper(II) sulfate, ReagentPlus®, ≥99%
Sigma-Aldrich
Copper(II) sulfate solution, 4 % (w/v) (prepared from copper (II) sulfate pentahydrate)
Sigma-Aldrich
Copper(II) sulfate pentahydrate, ReagentPlus®, ≥98.0%
Sigma-Aldrich
Copper(II) sulfate pentahydrate, ACS reagent, ≥98.0%
Sigma-Aldrich
Sodium standard solution, suitable for atomic absorption spectrometry, 1000 ppm Na, 1 mg/mL Na
Sigma-Aldrich
Potassium standard solution, suitable for atomic absorption spectrometry, 1000 ppm K+, 1 mg/mL K+
Sigma-Aldrich
Sodium chloride, SAJ first grade, ≥99.0%
Sigma-Aldrich
Copper(II) sulfate, ≥97.5%
Sigma-Aldrich
Sodium chloride solution, 0.1 M
Sigma-Aldrich
Fehling′s reagent (A)
Sigma-Aldrich
Sodium chloride solution, 1 M
Sigma-Aldrich
Potassium chloride solution, 0.01 M
Sigma-Aldrich
Sodium chloride, JIS special grade, ≥99.5%
Sigma-Aldrich
Copper(II) sulfate pentahydrate, JIS special grade, ≥99.5%
Sigma-Aldrich
Copper(II) sulfate, anhydrous, powder, ≥99.99% trace metals basis
Sigma-Aldrich
Sodium chloride, 99.999% trace metals basis
Sigma-Aldrich
Copper(II) sulfate pentahydrate, 99.999% trace metals basis
Sigma-Aldrich
Sodium chloride, random crystals, 99.9% trace metals basis
Sigma-Aldrich
Sodium chloride-35Cl, 99 atom % 35Cl
Sigma-Aldrich
Sodium chloride solution, 0.85%
Sigma-Aldrich
Potassium chloride solution, 0.075 M, sterile-filtered, BioXtra, suitable for cell culture
Sigma-Aldrich
Sodium chloride solution, 5 M
Sigma-Aldrich
Copper(II) sulfate pentahydrate, BioReagent, suitable for cell culture, ≥98%
Sigma-Aldrich
Sodium chloride, Molecular Biology, DNase, RNase, and protease, none detected, ≥99% (titration)