Skip to Content
MilliporeSigma
  • A green one-pot synthesis of Pt/TiO2/Graphene composites and its electro-photo-synergistic catalytic properties for methanol oxidation.

A green one-pot synthesis of Pt/TiO2/Graphene composites and its electro-photo-synergistic catalytic properties for methanol oxidation.

Journal of colloid and interface science (2014-08-16)
Lingting Ye, Zhongshui Li, Lian Zhang, Fengling Lei, Shen Lin
ABSTRACT

A facile and green one-pot method was used to synthesize Pt/TiO2/Graphene composites with ethanol as a reducing agent under microwave irradiation. The as-prepared composites were characterized by SEM, TEM, EDX, XPS, XRD and Raman. Electrocatalytic performance of the Pt/TiO2/GNs composites was investigated by cyclic voltammetry (CV), chronoamperometric (CA), COad stripping voltammetry and electrochemical impedance spectrum (EIS). All experimental data have revealed that TiO2 (P25) not only enhanced the reduction ability of ethanol under microwave irradiation but also promoted Pt heterogeneous nucleation to form Pt nanoclusters which are around P25 and loaded on graphene nanosheets (GNs) surface. Electrochemical experiments showed that Pt/TiO2/GNs had much higher catalytic activity and stability toward methanol oxidation reaction (MOR) and better resistance to CO poisoning compared with Pt/GNs and the commercially available Johnson Matthey 20% Pt/C catalyst (Pt/C-JM). Especially under UV irradiation with 20min, Pt/TiO2/GNs composites showed an ultrahigh forward peak current density of 1354mAmg(-1), nearly 2.5 times higher than that of Pt/C-JM, which indicated that the electrocatalytic and photocatalytic properties of Pt/TiO2/GNs had been integrated to boost the catalytic performance for MOR.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Ethanol, JIS 300, ≥99.5%, suitable for residue analysis
Sigma-Aldrich
Ethanol, JIS 1000, ≥99.5%, suitable for residue analysis
Sigma-Aldrich
Ethanol, ≥99.5%
Sigma-Aldrich
Ethanol, ≥99.5%, suitable for absorption spectrum analysis
Sigma-Aldrich
Ethanol, ≥99.5%, suitable for fluorescence
Sigma-Aldrich
Ethanol, ≥99.5%, SAJ super special grade
Sigma-Aldrich
Ethanol, ≥99.5%, suitable for HPLC
Supelco
Sulfuric acid concentrate, 0.1 M H2SO4 in water (0.2N), eluent concentrate for IC
Sigma-Aldrich
Ethyl alcohol, Pure, 200 proof, anhydrous, ≥99.5%
Sigma-Aldrich
Ethyl alcohol, Pure, 190 proof, meets USP testing specifications
Sigma-Aldrich
Ethyl alcohol, Pure, 190 proof, ACS spectrophotometric grade, 95.0%
Sigma-Aldrich
Methanol solution, suitable for NMR (reference standard), 4% in methanol-d4 (99.8 atom % D), NMR tube size 3 mm × 8 in.
Supelco
Methanol solution, contains 0.10 % (v/v) formic acid, UHPLC, suitable for mass spectrometry (MS), ≥99.5%
Sigma-Aldrich
Ethanol, purum, fine spirit, denaturated with 4.8% methanol, F25 METHYL1, ~96% (based on denaturant-free substance)
Sigma-Aldrich
Ethanol, ACS reagent, prima fine spirit, without additive, F15 o1
Sigma-Aldrich
Ethanol, purum, absolute ethanol, denaturated with 2% 2-butanone, A15 MEK1, ≥99.8% (based on denaturant-free substance)
Sigma-Aldrich
Ethyl alcohol, Pure 200 proof, Molecular Biology
Sigma-Aldrich
Ethyl alcohol, Pure, 200 proof, ACS reagent, ≥99.5%
Sigma-Aldrich
Ethyl alcohol, Pure, 200 proof, meets USP testing specifications
Sigma-Aldrich
Ethanol, puriss. p.a., absolute, ≥99.8% (GC)
Sigma-Aldrich
Ethyl alcohol, Pure, 200 proof
USP
Methyl alcohol, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Methanol, SAJ special grade
Sigma-Aldrich
Methanol, suitable for HPLC
Sigma-Aldrich
Methanol, suitable for NMR (reference standard)
Supelco
Dehydrated Alcohol, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, 99.93%
Sigma-Aldrich
Sulfuric acid, SAJ first grade, ≥95.0%
Supelco
Ethanol solution, certified reference material, 2000 μg/mL in methanol
Sigma-Aldrich
Ethanol, 94.8-95.8%