Pular para o conteúdo
Merck

Synthesis of surfactant-free hydroxypropylcellulose nanogel and its dual-responsive properties.

Carbohydrate polymers (2015-10-03)
Dong An, Di Zhao, Xueting Li, Xihua Lu, Gao Qiu, Kenneth J Shea
RESUMO

Surfactant-free hydroxypropylcellulose (HPC) nanogels were synthesized by using thermo-sensitive HPC as a template to form HPC/PMAA nanoscale complex. The formation mechanism was owing to the interpolymer hydrogen bonding between HPC and PMAA induced phase transition of HPC in aqueous media. The average size of the resulting HPC nanogels ranges from about 98 to 241 nm. It was found that the average size of HPC nanogels changed little with increasing polymerization temperature below 26 °C, whereas it greatly increased above 26 °C. When the concentration of HPC was increased from 0.1 to 0.9 wt.%, the diameter of nanogels decreased firstly and then increased. Besides, an increasing crosslinker BIS concentration led to a reduced size of HPC nanogels, and the nanogels had the narrowest size distribution when its concentration was 0.1 wt.%. In addition to intrinsic thermo-sensitivity, HPC nanogels also display pH-induced phase transition due to pH-responsive PMAA contained in HPC nanogels. Surfactant-free, dual-responsive HPC nanogels would have promising applications in biotechnology and nanomedicine.

MATERIAIS
Número do produto
Marca
Descrição do produto

Sigma-Aldrich
Hidróxido de sódio, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Hidróxido de sódio, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Hidróxido de sódio, 50% in H2O
Sigma-Aldrich
Persulfato de amônio, ACS reagent, ≥98.0%
Sigma-Aldrich
Hidróxido de sódio, BioUltra, Molecular Biology, 10 M in H2O
Sigma-Aldrich
Hidróxido de sódio, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
N,N,N′,N′-tetrametiletilenodiamina, BioReagent, suitable for electrophoresis, ≥99.0%
Sigma-Aldrich
Persulfato de amônio, Molecular Biology, suitable for electrophoresis, ≥98%
Sigma-Aldrich
Hidróxido de sódio, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Hidróxido de sódio, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Persulfato de amônio, reagent grade, 98%
Sigma-Aldrich
Hidróxido de sódio, reagent grade, 97%, powder
Sigma-Aldrich
N,N,N′,N′-tetrametiletilenodiamina, BioReagent, Molecular Biology, ≥99% (GC)
Sigma-Aldrich
Methacrylic acid, contains 250 ppm MEHQ as inhibitor, 99%
Sigma-Aldrich
Hidróxido de sódio, puriss. p.a., ACS reagent, reag. Ph. Eur., K ≤0.02%, ≥98%, pellets
Sigma-Aldrich
Hidróxido de sódio, pellets, semiconductor grade, 99.99% trace metals basis
Sigma-Aldrich
N,N′-Methylenebisacrylamide, powder, Molecular Biology, suitable for electrophoresis, ≥99.5%
Sigma-Aldrich
N,N,N′,N′-tetrametiletilenodiamina, ≥99.5%, purified by redistillation
Sigma-Aldrich
N,N′-Methylenebis(acrylamide), 99%
Sigma-Aldrich
Hidróxido de sódio, 5.0 M
Sigma-Aldrich
Hidróxido de sódio, beads, 16-60 mesh, reagent grade, 97%
Sigma-Aldrich
Hidróxido de sódio, puriss. p.a., ACS reagent, K ≤0.02%, ≥98.0% (T), pellets
Sigma-Aldrich
N,N,N′,N′-tetrametiletilenodiamina, ReagentPlus®, 99%
Sigma-Aldrich
Hidróxido de sódio, reagent grade, 97%, flakes
Sigma-Aldrich
Hidróxido de sódio, BioUltra, suitable for luminescence, ≥98.0% (T), pellets
Sigma-Aldrich
Persulfato de amônio, BioUltra, ≥98.0% (RT)
Sigma-Aldrich
N,N′-Methylenebisacrylamide solution, suitable for electrophoresis, 2% in H2O
Sigma-Aldrich
Persulfato de amônio, BioXtra, ≥98.0%
Sigma-Aldrich
Hidróxido de sódio, purum, ≥32%
Sigma-Aldrich
N,N′-Methylenebisacrylamide, suitable for electrophoresis (after filtration or allowing insolubles to settle)