Skip to Content
MilliporeSigma
  • Broad spectrum analysis of polar and apolar organic compounds in submicron atmospheric particles.

Broad spectrum analysis of polar and apolar organic compounds in submicron atmospheric particles.

Journal of chromatography. A (2015-06-10)
Marta Fontal, Barend L van Drooge, Jordi F López, Pilar Fernández, Joan O Grimalt
ABSTRACT

A method for the quantitative analysis of organic compounds on submicron particulate matter (PM1) collected on quartz filters was developed. The compounds analyzed encompassed C22-C35 alkanes, polycyclic aromatic hydrocarbons (PAHs), quinones, levoglucosan, cis-pinonic acid and short chain dicarboxylic acids such as malonic, succinic, glutaric, adipic, suberic, azelaic, malic and phthalic acids. The method included extraction with a pressure liquid extraction system, sample filtration though glass fibre filter, fractionation by high performance liquid chromatography and subsequent analysis by gas chromatography coupled to mass spectrometry. The study of the extraction efficiency of different solvent mixtures showed that DCM:MeOH 1:1 was the one providing the highest recoveries for all compounds. Extraction temperatures of 100°C provided better results than 60°C or 80°C. This method provided comparable extraction efficiency and qualitative and quantitative data to those involving Soxhlet extraction. Method recoveries for alkanes, most PAH, quinones and polar compounds calculated from spiked real samples were 52-72%, 78-101%, 50-62% and 76-104%, respectively, reproducibilities were 2-28%, 7-29%, 10-27% and 5-28%, respectively, limits of quantification were 0.01-0.1ng/m(3), 0.01-0.27ng/m(3), 0.04ng/m(3) and 0.32-2.8ng/m(3), respectively, which affords the quantification of a broad number of primary and secondary organic constituents of submicron aerosols.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Hexane, suitable for HPLC
Sigma-Aldrich
Succinic acid, SAJ special grade, ≥99.5%
Sigma-Aldrich
Hexane, suitable for residue analysis, JIS 5000
Sigma-Aldrich
Dichloromethane, JIS special grade, ≥99.0%
Sigma-Aldrich
Dichloromethane, SAJ first grade, ≥99.0%
Sigma-Aldrich
Hexane, JIS 300, ≥96.0%, suitable for residue analysis
Sigma-Aldrich
Hexane, JIS 1000, ≥96.0%, suitable for residue analysis
Sigma-Aldrich
Hexane, SAJ first grade, ≥95.0%
Sigma-Aldrich
Pyridine, JIS special grade, ≥99.5%
Sigma-Aldrich
Pyridine, suitable for hydroxyl value determination, ≥99.5%
Sigma-Aldrich
Hexane, ≥96.0%, suitable for residual phthalate analysis
Sigma-Aldrich
Hexane, JIS special grade, ≥96.0%
Sigma-Aldrich
Hexane, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Sigma-Aldrich
Suberic acid, 98%
Sigma-Aldrich
Benz[a]anthracene, 99%
Sigma-Aldrich
Methanol solution, suitable for NMR (reference standard), 4% in methanol-d4 (99.8 atom % D), NMR tube size 3 mm × 8 in.
Sigma-Aldrich
Dichloromethane, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Pyridine, anhydrous, 99.8%
Sigma-Aldrich
1,6-Anhydro-β-D-glucose, 99%
Sigma-Aldrich
Succinic acid, ACS reagent, ≥99.0%
Sigma-Aldrich
N,O-Bis(trimethylsilyl)trifluoroacetamide, ≥99%
Sigma-Aldrich
Hexane, anhydrous, 95%
Sigma-Aldrich
Trifluoroacetamide, 97%
Sigma-Aldrich
9-Fluorenone, 98%
Sigma-Aldrich
Chlorotrimethylsilane solution, 1.0 M in THF
Supelco
Dichloromethane, ≥99.9%
Sigma-Aldrich
Fluoranthene, 98%
Sigma-Aldrich
Succinic acid, puriss. p.a., ACS reagent, ≥99.5% (T)
Sigma-Aldrich
Pyridine, ≥99%
Sigma-Aldrich
Dichloromethane, suitable for HPLC, ≥99.9%, contains 40-150 ppm amylene as stabilizer