MTGR65010

Filtro de cápsula Aervent^® 50

pore size 0.2 μm

• Sinônimo(s): Est. EPA 041237-FRA-001
• Código UNSPSC: 23151806

Propriedades

• Materiais: PTFE membrane; polypropylene ; polypropylene housing
• Nível de qualidade: 400
• esterilidade: non-sterile
• Compatibilidade de esterilização: gamma compatible
• linha de produto: Aervent^®
• Características: hydrophobic
• fabricante/nome comercial: Aervent^®
• Parâmetros: 2.1 bar max. differential pressure at 25 °C; 4.1 bar max. inlet pressure (60 psi) at 25 °C
• técnica(s): gas filtration: suitable
• Comprimento: 5.3 cm (2.1 in.)
• Largura: 2.4 in.
• Diâmetro: 6.2 cm (2.4 in.)
• área de filtração: 19.6 cm²
• Impurezas: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• extraíveis gravimétricos: ≤1.0 mg
• Matriz: Aervent^®
• tamanho de poro: 0.2 μm pore size
• ponto de bolha: ≥1100 mbar (16 psig), nitrogen with 60/40% IPA/water at 23 °C
• conector: (3 mm (1/8 in.) NPT Inlet and Outlet)

Descrição

Descrição geral

Prostak^™ MF Module are a tangential flow filtration device in a stacked plate configuration with Type V screen open feed channel. A microporous membrane, Durapore^® polyvinylidene fluoride (PVDF), is bonded on both sides of each plate. The plates are then stacked in parallel forming stacks.

This Prostak^™ microfiltration open-channel module features a Pore Size of 0.1 μm and a filtration area of 0.17 m². PSVVAG021 is available in a 2 stack, making it applicable for bench-top, pilot, and production scale systems.

The modules can be integrity tested and steam sterilized for 20 cycles.

Prostak^™ MF modules must be used with a support holder, which controls deflection and provides sanitary fittings for connection to external piping. Sanitary gaskets supplied with the module provide a leak-free connection between the module(s) and the holder.

Aplicação

Typical Applications

• Sterile venting of vessels and carboys
• Autoclave vacuum break lines
• Low volume sterile filtration of non-aqueous fluids
• Small fermenter inlet and exhaust gas filtration

Nota de preparo

Sterilization Method
10 autoclave cycles of 30 min @ 130 °C; not in-line steam sterilizable

Nota de análise

Bacterial Retention
Quantitative retention of 10⁷ CFU/cm²Brevundimonas diminuta (ATCC^® 19146) per ASTM F838-83 methodology

Gravimetric Extractables: in 70/30 % IPA/water

Outras notas

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Informações legais

AERVENT is a registered trademark of Merck KGaA, Darmstadt, Germany

ATCC is a registered trademark of American Type Culture Collection

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

Prostak is a trademark of Merck KGaA, Darmstadt, Germany