Skip to Content
MilliporeSigma
  • Hemodynamic effects of a poly(ethylene oxide) drag-reducing polymer, Polyox WSR N-60K, in the open-chest rat.

Hemodynamic effects of a poly(ethylene oxide) drag-reducing polymer, Polyox WSR N-60K, in the open-chest rat.

Journal of cardiovascular pharmacology (1989-09-01)
P I Polimeni, B T Ottenbreit
ABSTRACT

The acute hemodynamic effects of an intravenously (i.v.) injected poly(ethylene oxide), Polyox WSR N-60K (dose 50 mg/kg), were studied in the open-chest rat anesthetized with sodium pentobarbital. The injectate is one of four drag-reducing polymers known to augment in vitro blood flow under a constant pressure gradient; the others are an anionic polyacrylamide (Separan), a rhamnogalactogalacturonan (RGGu), and a deoxyribonucleic acid (calf thymus DNA). RGGu and Separan both augment cardiac output in the rat. Aortic blood flow, measured with an electromagnetic flow probe mounted on the ascending aorta, increased immediately after administration of the polymer and remained above control flow for at least 1 h. A small sustained decrease in heart rate (HR) was associated with a prolongation of systole. Ventricular and arterial blood pressures increased progressively over the 2-h postinjection period. Total peripheral resistance (TPR) initially decreased but then increased continuously throughout the experimental period, eventually surpassing the control value. Although the in vivo effects of Polyox differ from those of RGGu and Separan, the effects of the three macromolecules on aortic flow and TPR are similar at least in the first hour. Because the three substances are chemically dissimilar, these results further support the hypothesis that the primary mechanism responsible for the hemodynamic changes caused by some drag-reducing polymers--apparently limited to those with molecular lengths approaching 100 microns--is physical in nature.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Kollisolv® PEG E 300
Pricing and availability is not currently available.
Sigma-Aldrich
Kollisolv® PEG E 400
Pricing and availability is not currently available.
Supelco
Polyethylene glycol/Polyethylene oxide ReadyCal Set Mp ~250 -1′100 000, analytical standard
Pricing and availability is not currently available.
Sigma-Aldrich
Polyethylene glycol 3000 solution, BioUltra, Molecular Biology, ~50% in H2O
Pricing and availability is not currently available.
Sigma-Aldrich
Polyethylene glycol/ dimethyl sulfoxide solution, Hybri-Max, average mol wt 1,450, 50 % (w/v), 0.2 μm filtered, BioReagent, suitable for hybridoma
Pricing and availability is not currently available.
Sigma-Aldrich
Poly(ethylene glycol), SAJ first grade, average Mw 200
Pricing and availability is not currently available.
Sigma-Aldrich
Poly(ethylene glycol), SAJ first grade, average Mw 4000
Pricing and availability is not currently available.
Sigma-Aldrich
Poly(ethylene glycol), SAJ first grade, average Mw 1540
Pricing and availability is not currently available.
Sigma-Aldrich
Polyethylene glycol solution, BioUltra, Molecular Biology, 1,000, ~50% in H2O
Pricing and availability is not currently available.
Sigma-Aldrich
Poly(ethylene glycol), average Mn 4,600
Pricing and availability is not currently available.
Sigma-Aldrich
Poly(ethylene glycol), average Mn 400
Pricing and availability is not currently available.
Sigma-Aldrich
Poly(ethylene glycol), average Mn 600, waxy solid (moist)
Pricing and availability is not currently available.
Sigma-Aldrich
Poly(ethylene glycol), average Mn 1,305-1,595, waxy solid
Pricing and availability is not currently available.
Sigma-Aldrich
Poly(ethylene glycol), average Mv ~8,000, powder (crystalline)
Pricing and availability is not currently available.
Sigma-Aldrich
Poly(ethylene glycol), average Mn 3,350, powder
Pricing and availability is not currently available.
Sigma-Aldrich
Poly(ethylene glycol), average Mn 300
Pricing and availability is not currently available.
Supelco
Poly(ethylene glycol), analytical standard, suitable for gel permeation chromatography (GPC), 40,000
Pricing and availability is not currently available.
Sigma-Aldrich
Poly(ethylene glycol), average Mn 6,000
Pricing and availability is not currently available.
Supelco
Poly(ethylene glycol), analytical standard, suitable for gel permeation chromatography (GPC), 200
Pricing and availability is not currently available.
Supelco
Poly(ethylene glycol), analytical standard, suitable for gel permeation chromatography (GPC), 400
Pricing and availability is not currently available.
Supelco
Poly(ethylene glycol), analytical standard, suitable for gel permeation chromatography (GPC), 6,000
Pricing and availability is not currently available.
Supelco
Poly(ethylene glycol), analytical standard, suitable for gel permeation chromatography (GPC), 8,000
Pricing and availability is not currently available.
Supelco
Poly(ethylene glycol), analytical standard, suitable for gel permeation chromatography (GPC), 4,000
Pricing and availability is not currently available.
Supelco
Poly(ethylene glycol), analytical standard, suitable for gel permeation chromatography (GPC), 3,000
Pricing and availability is not currently available.
Sigma-Aldrich
Poly(ethylene glycol), average Mn 10,000, flakes
Pricing and availability is not currently available.
Supelco
Poly(ethylene glycol), analytical standard, 2,000
Pricing and availability is not currently available.
Supelco
Poly(ethylene glycol), analytical standard, suitable for gel permeation chromatography (GPC), 12,000
Pricing and availability is not currently available.
Supelco
Poly(ethylene glycol), analytical standard, 1,000
Pricing and availability is not currently available.
Supelco
Poly(ethylene glycol), analytical standard, suitable for gel permeation chromatography (GPC), 1,500
Pricing and availability is not currently available.
Sigma-Aldrich
Poly(ethylene glycol), BioUltra, 6,000
Pricing and availability is not currently available.