Skip to Content
MilliporeSigma
  • Simultaneous derivatization and solid-based disperser liquid-liquid microextraction for extraction and preconcentration of some antidepressants and an antiarrhythmic agent in urine and plasma samples followed by GC-FID.

Simultaneous derivatization and solid-based disperser liquid-liquid microextraction for extraction and preconcentration of some antidepressants and an antiarrhythmic agent in urine and plasma samples followed by GC-FID.

Journal of chromatography. B, Analytical technologies in the biomedical and life sciences (2015-01-27)
Mir Ali Farajzadeh, Parisa Khorram, Houshang Ghorbanpour
ABSTRACT

The present work is based on a one-step method including derivatization and solid-based disperser liquid-liquid microextraction followed by gas chromatography-flame ionization detection (GC-FID) for the determination of four antidepressants (fluoxetine, fluvoxamine, tranylcypromine, and nortriptyline) and an antiarrhythmic agent (mexiletine) in human urine and plasma samples. In this method, a mixture of 1,1,2,2-tetrachloroethane (extraction solvent) and butylchloroformate (derivatizing reagent) is added on a sugar cube (solid disperser) and it is introduced into an aqueous sample containing the analytes and a catalyst, e.g. 3-methylpyridine (picoline). During dissolving the sugar cube by manual shaking, the extractant and derivatization agent are gradually released into the sample as very fine droplets. Then the resulted cloudy solution is centrifuged and the sedimented phase is analyzed by GC-FID. The influence of several variables on the efficiency of derivatization/microextraction procedure such as kind and volume of extraction solvent, type and amount of disperser, amount of derivatization agent, and catalyst volume are optimized. Under the optimum conditions the calibration curves are linear in the range of 8-100,000μgL(-1) (coefficient of determination ≥0.994). The relative standard deviations are obtained in the range of 3.0-6.0% for all compounds. Moreover, the detection limits and enrichment factors of the target analytes are obtained in the ranges 1-15μgL(-1) and 228-268, respectively, for both plasma and urine samples. The relative recoveries obtained for the spiked plasma and urine samples are between 70 and 91%. The results show that the proposed method is simple, reliable, low cost, and applicable to determine trace amounts of the studied drugs in biological samples.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Sodium hydroxide-16O solution, 20 wt. % in H216O, 99.9 atom % 16O
Pricing and availability is not currently available.
Sigma-Aldrich
1-Bromo-2-chloroethane, 98%
Pricing and availability is not currently available.
Sigma-Aldrich
Butyl chloroformate, 98%
Pricing and availability is not currently available.
Sigma-Aldrich
Potassium carbonate, 99.995% trace metals basis
Pricing and availability is not currently available.
Sigma-Aldrich
Potassium carbonate, BioUltra, anhydrous, ≥99.0% (T)
Pricing and availability is not currently available.
Sigma-Aldrich
Hydrogen chloride, ReagentPlus®, ≥99%
Pricing and availability is not currently available.
Sigma-Aldrich
2-Methylpyridine, 98%
Pricing and availability is not currently available.
Sigma-Aldrich
Potassium carbonate, meets USP testing specifications
Pricing and availability is not currently available.
Supelco
Residual Solvent - Chloroform, Pharmaceutical Secondary Standard; Certified Reference Material
Pricing and availability is not currently available.
Sigma-Aldrich
Methanol solution, suitable for NMR (reference standard), 4% in methanol-d4 (99.8 atom % D), NMR tube size 3 mm × 8 in.
Pricing and availability is not currently available.
Supelco
Methanol solution, contains 0.10 % (v/v) formic acid, UHPLC, suitable for mass spectrometry (MS), ≥99.5%
Pricing and availability is not currently available.
Sigma-Aldrich
Potassium carbonate, BioXtra, ≥99.0%
Pricing and availability is not currently available.
Sigma-Aldrich
Potassium carbonate, anhydrous, free-flowing, Redi-Dri, ACS reagent, ≥99%
Pricing and availability is not currently available.
Sigma-Aldrich
Potassium carbonate, meets analytical specification of Ph. Helv., puriss., anhydrous, granulated, 99-101% (calc. to the dried substance)
Pricing and availability is not currently available.
Sigma-Aldrich
Potassium carbonate, anhydrous, free-flowing, −325 mesh, Redi-Dri, reagent grade, ≥98%
Pricing and availability is not currently available.
Sigma-Aldrich
Potassium carbonate, puriss. p.a., ACS reagent, anhydrous, ≥99.0% (T)
Pricing and availability is not currently available.
Sigma-Aldrich
Potassium carbonate, ACS reagent, ≥99.0%
Pricing and availability is not currently available.
Sigma-Aldrich
Potassium carbonate, anhydrous, free-flowing, Redi-Dri, ReagentPlus®, 99%
Pricing and availability is not currently available.
Sigma-Aldrich
Potassium carbonate, ReagentPlus®, 99%
Pricing and availability is not currently available.
Sigma-Aldrich
Potassium carbonate, reagent grade, ≥98%, powder, −325 mesh
Pricing and availability is not currently available.
Supelco
2-Picoline, analytical standard
Pricing and availability is not currently available.
USP
Methyl alcohol, United States Pharmacopeia (USP) Reference Standard
Pricing and availability is not currently available.
Sigma-Aldrich
Potassium carbonate, powder, 99.99% trace metals basis
Pricing and availability is not currently available.
Sigma-Aldrich
Hydrogen chloride solution, 3 M in cyclopentyl methyl ether (CPME)
Pricing and availability is not currently available.
Sigma-Aldrich
Methanol, SAJ special grade
Pricing and availability is not currently available.
Sigma-Aldrich
Methanol, suitable for HPLC
Pricing and availability is not currently available.
Sigma-Aldrich
Chloroform, suitable for HPLC
Pricing and availability is not currently available.
Sigma-Aldrich
Hydrogen chloride – ethanol solution, 0.1 M in ethanol
Pricing and availability is not currently available.
Sigma-Aldrich
Sodium hydroxide, JIS special grade, ≥96.0%
Pricing and availability is not currently available.
Sigma-Aldrich
Methanol, JIS 300, ≥99.8%, suitable for residue analysis
Pricing and availability is not currently available.