Skip to Content
MilliporeSigma
  • Preparation of malathion MIP-SPE and its application in environmental analysis.

Preparation of malathion MIP-SPE and its application in environmental analysis.

Environmental monitoring and assessment (2015-06-04)
Hai Gen Zuo, Jian Xin Zhu, Chun Rui Zhan, Lei Shi, Ming Xing, Ping Guo, Yuan Ding, Hong Yang
ABSTRACT

Malathion is an organophosphorous insecticide for controlling insects on fruits and vegetables, miscellaneous household insects, and animal parasites. It is important to develop highly efficient and selective pre-treatment method for analyzing malathion residues in environment and samples from agricultural products based on the molecularly imprinted polymers (MIPs). In this study, we developed a tailor-made MIP method with highly specific recognization to the template. The MIPs were prepared using malathion as a template, methacrylic acid (MAA) as a functional monomer, ethylene glycol dimethacrylate (EGDMA) as a crosslinker, azodiisobutyronitrile (AIBN) as an initiator, and the acetonitrile-chloroform (1:1, v/v) as a porogen. The molecular recognization mechanism of malathion and MAA was evaluated by molecular simulation, ultraviolet spectrometry (UV), and (1)H-nuclear magnetic resonance ((1)H-NMR). MAA interacted specifically with malathion by hydrogen bond with a ratio of 2:1. The MIPs exhibit a high affinity, recognition specificity, and efficient adsorption performance for malathion. The Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), surface area and porosimeter analyzer, thermogravimetric/differential thermal analyzer (TG/DTA) were used to characterize the properties of MIP. The malathion residues in soil, tap water, and cabbage were cleaned up by MIP-SPE, detected quantitatively using GC-FPD, and confirmed by GC-MS/MS. The limits of tap water, soil, and cabbage were confined to 0.001 mg L(-1), 0.004 and 0.004 mg kg(-1), respectively. The spiked recoveries of malathion were 96.06-111.49% (with RSD being 5.7-9.2%), 98.13-103.83% (RSD, 3.5-8.7%), and 84.94-93.69% (RSD, 4.7-5.8%) for tap water, soil, and cabbage samples, respectively. Thus, the method developed here can be used effectively in assessing malathion residues in multiple environmental samples. The aim of the study was to provide an efficient, selective, and accurate method for analyzing malathion at trace levels in multiple media.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Methanol, SAJ special grade
Sigma-Aldrich
Chloroform, suitable for HPLC
Sigma-Aldrich
Sodium chloride, JIS special grade, ≥99.5%
Sigma-Aldrich
Methanol, suitable for HPLC
Sigma-Aldrich
Acetonitrile solution, contains 10.0% acetone, 0.05% formic acid, 40.0% 2-propanol
Sigma-Aldrich
Sodium chloride solution, 0.1 M
Sigma-Aldrich
Chloroform, SAJ super special grade, ≥99.0%
Sigma-Aldrich
Methanol, SAJ first grade, ≥99.5%
Sigma-Aldrich
Chloroform, SAJ first grade, ≥99.0%, contains 0.4-0.8% ethanol
Sigma-Aldrich
Methanol, JIS 300, ≥99.8%, suitable for residue analysis
Sigma-Aldrich
Methanol, JIS special grade, ≥99.8%
Sigma-Aldrich
Chloroform, JIS 300, ≥99.0%
Sigma-Aldrich
Ethylene glycol dimethacrylate, 98%, contains 90-110 ppm monomethyl ether hydroquinone as inhibitor
Sigma-Aldrich
Sodium chloride, 99.999% trace metals basis
Sigma-Aldrich
Chloroform, anhydrous, contains amylenes as stabilizer, ≥99%
Sigma-Aldrich
Sodium chloride, random crystals, 99.9% trace metals basis
Sigma-Aldrich
Sodium chloride-35Cl, 99 atom % 35Cl
Sigma-Aldrich
Chloroform, anhydrous, ≥99%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Sodium chloride solution, BioUltra, Molecular Biology, ~5 M in H2O
Sigma-Aldrich
Sodium chloride, BioUltra, Molecular Biology, ≥99.5% (AT)
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Supelco
Chloroform, suitable for HPLC, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Sodium chloride, AnhydroBeads, −10 mesh, 99.999% trace metals basis
Sigma-Aldrich
Chloroform, ACS reagent, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Acetonitrile solution, contains 0.05 % (w/v) ammonium formate, 5 % (v/v) water, 0.1 % (v/v) formic acid, suitable for HPLC
Sigma-Aldrich
Acetonitrile solution, contains 0.1 % (v/v) trifluoroacetic acid, suitable for HPLC
Sigma-Aldrich
Sodium chloride solution, 0.85%
Sigma-Aldrich
Acetonitrile solution, contains 0.05 % (v/v) trifluoroacetic acid
Sigma-Aldrich
Acetonitrile solution, contains 0.1 % (v/v) formic acid, suitable for HPLC
Sigma-Aldrich
Sodium chloride solution, 5 M in H2O, BioReagent, Molecular Biology, suitable for cell culture